Overview
SLG1700-80 tube furnace is a high temperature experimental equipment of SHENGLI brand, using 99 high purity aluminum oxide corundum furnace tube and silicon carbide rod heating element, equipped with double shell structure, 51-stage program temperature control system and cold air rapid cooling system, temperature control accuracy up to +/- 1 ° C, the highest temperature up to 1700 ° C, suitable for universities, research institutes and industrial and mining enterprises.
Features
1. Adopt 99 high purity aluminum oxide corundum furnace tube, excellent high temperature performance
2. The heating element is silicon carbide rod, providing efficient heating
3. Double Shell Structure Design Enhances Equipment Stability and Safety
4.51-Stage programmed temperature control system for accurate temperature control
5. The double shell is equipped with a cold air system, which can quickly cool down
6. Both ends are sealed with stainless steel flanges to ensure sealing
7. Temperature control accuracy is +/- 1 ° C, Temperature range up to 1600 ° C
8. The maximum temperature can reach 1700 ° C, meeting the needs of high temperature experiments
Principle
The tube furnace is heated by the silicon carbon rod heating element, and the High Accuracy SCR Phase Shift Trigger Control system is used to achieve accurate temperature adjustment. Linear dispersion is set with the 51-stage programmed temperature control system, and the cold air system is circulated between the double shells to quickly cool down to ensure the stability and efficiency of the experimental process.
Applications
Universities, research institutes, industrial and mining enterprises
Steps
1. Power supply voltage 220V
2. Set temperature parameters through the 51-stage program temperature control system
3. Start the heating system, and the silicon carbide rod starts to heat up
4. Monitor temperature changes to ensure temperature control accuracy +/- 1 ° C
5. After the experiment is completed, use the cold air system to quickly cool down
6. Turn off the power and perform equipment cleaning and maintenance
Notice
• Power supply voltage 220V to avoid voltage mismatch
• Pay attention to high temperature during operation to prevent burns
• Regularly check furnace tubes and sealing components to ensure no damage
• Temperature monitoring with Type B Thermocouple to ensure accuracy
• The heating rate is controlled at ≤ 10 ° C/min to avoid excessive heating
• Use Air-Cooled system when chilling down to prevent equipment from overheating
• Follow the program temperature control settings to avoid over-temperature operation
