Overview
SHENGLI SLG1700-100 tube furnace is a high-temperature heating equipment, using 99 high-purity aluminum oxide corundum furnace tube and silicon carbide rod heating element, equipped with double shell structure, 51-stage program temperature control system and cold air rapid cooling system, temperature control accuracy up to +/- 1 ° C, the highest temperature up to 1700 ° C, suitable for universities, research institutes and industrial and mining enterprises.
Features
1. Adopt 99 high purity aluminum oxide corundum furnace tube, good high temperature resistance performance;
2. The heating element is silicon carbide rod, providing stable heating.
3. Double-shell structure design enhances equipment safety.
4.51-Stage programmed temperature control system to achieve accurate temperature control.
5. Equipped with a cold air system, it can quickly cool down.
6. Both ends are sealed with stainless steel flanges to ensure sealing;
7. High temperature control accuracy, up to +/- 1 ° C;
8. Maximum temperature up to 1700 ° C, suitable for a variety of high-temperature applications.
Principle
The tube furnace is heated by a silicon carbide heating element, and the temperature is adjusted by a High Accuracy SCR Phase Shift Trigger Control system. The double shell structure cooperates with the cold air system to accelerate heat dissipation to ensure stable operation and rapid cooling of the equipment.
Applications
Universities, research institutes, industrial and mining enterprises
Steps
1. Connect the power supply and ensure that the voltage is 220V.
2. Set up the programmed temperature control system and adjust the temperature parameters as required.
3. Start the equipment and monitor the heating process.
4. After use, enable the cold air system for rapid cooling.
5. Turn off the power and perform equipment cleaning and maintenance.
Notice
• Power supply voltage check before operation meets 220V requirements;
• Avoid use above the maximum temperature of 1700 ° C.
• Regularly check the furnace tube and sealing parts to ensure no damage;
• Pay attention to safety when using the cold air system to prevent burns;
• Keep the equipment well ventilated during operation;
• Non-professional personnel should not disassemble or repair the equipment.
