Please contact customer service
Maximum test force 10KN, beam traverse speed 0.05-500 mm/min stepless speed regulation, AC servo drive and precision screw loading, stable transmission accuracy, with a variety of protection functions.
Category : Tensile Testing Machine
Brand : YongLiDa
SKU : NB018199
Service :The delivery and service By NBCLab.Com
YONGLIDA WDW-10 electronic universal testing machine has beautiful appearance, convenient operation and stable and reliable performance. The equipment is suitable for the detection of mechanical properties of various metals, Non-metallic and composite. It is a satisfactory testing equipment for scientific research institutions, Universities & colleges, industrial and mining enterprises, technical supervision, commodity inspection and arbitration and other departments.
1. Adopt programmable device CPLD, high-speed processing, programmable amplification, stable and reliable. 2. Control performance with force, displacement, deformation three closed-loop Control mode, real-time data display. 3. Linear dispersion of force-displacement, force-deformation, force-time and other tests can be displayed. 4. After the test, the resilience modulus, upper and lower yield strength, tensile strength, elongation and other test results can be automatically calculated. 5. Built-in test methods for metals such as GB/T 228-2002 or Non-metallic. 6. Provide diverse reporting formats and adopt standard database management methods. 7. Driven by AC servo speed control motor and speed control system, it drives the precision screw pair to load after being decelerated by arc timing belt and timing belt wheel. It has the characteristics of smooth transmission, low noise, high operating efficiency and accuracy, wide speed control range, stable and reliable. 8. With a variety of protection functions such as peak holding, automatic shutdown of sample breakage, electrical overload, and upper and lower mechanical limits. 9. Complete tensile, bending, compression, and shear tests according to corresponding standards.
The machine adopts AC servo speed control motor and AC servo speed control system as the driving device. After deceleration by arc synchronous belt and arc synchronous belt wheel deceleration system, the precision lead screw pair is driven to load to realize the mechanical properties test of the sample. The control system uses programmable device CPLD to realize high-speed processing and program-controlled amplification. Through force, displacement and deformation three closed-loop Control modes, real-time data collection and processing are carried out.
Building materials, Aerospace, Machine building, Wires and cables, Rubber plastics, Spinning & weaving, Home appliances
GB/T 228-2002
1. Turn on the power supply (single-phase 220V, 50Hz). 2. Install the corresponding fixture according to the test requirements. 3. Select or set the test method in the control system (e.g. the built-in GB/T 228-2002 standard). 4. Clamp the specimen between the upper and lower clamps. 5. Set test parameters (such as beam traverse speed, range 0.05-500 mm/min stepless speed regulation). 6. Start the test and the device will load automatically. 7. Real-time observation of force, displacement, deformation and other data and Linear dispersion during the test. 8. After the sample is broken, the equipment automatically stops, and the system automatically calculates and displays the test results (such as resilience modulus, upper and lower yield strength, tensile strength, elongation, etc.). 9. Generate and save or print the test report.
Equipment should be installed on a solid foundation to ensure smooth operation. * Before operation, please check whether the Power supply voltage is single-phase 220V, 50Hz. Do not exceed the maximum test force of the device (10KN). When clamping the specimen, ensure that the specimen is centered and firmly clamped. Before running, please confirm that there are no obstacles in the moving space of the beam, and check whether the upper and lower mechanical limits are valid. Do not touch moving parts while the device is running. Equipment is regularly maintained and calibrated to ensure Measurement accuracy. When encountering an alarm such as electrical overload, please stop the machine immediately for inspection.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
