Overview
The PUSHEN JSF-550 Mixing and Scrubbing Disperser is a high-speed laboratory equipment for dispersing, stirring and sanding liquid materials. The product adopts a popular frequency conversion electromechanical design, which operates quietly and with low noise. The lifting method is manual lifting.
Features
1. Adopt frequency conversion electromechanical design, quiet operation and low noise
2. Manual lifting mode, easy to operate
3. Wide speed range, up to 0~ 10000rpm
4. Suitable for a variety of processing needs, including dispersion, mixing, and sanding
Principle
The device drives the impeller or matte disc to swirl/spin at high speed to disperse, stir and sand the liquid material. The frequency conversion control technology can realize accurate Rotation speed adjustment to meet the processing requirements of different materials.
Applications
Laboratory liquid material handling
Standards
GB/T 21868.3、ISO 8780-3
Steps
1. Connect the device to a 220V AC 50HZ power supply
2. Install the corresponding impeller or matte disc according to the processing needs
3. Adjust the manual lifting device to the appropriate height
4. Rotation speed parameters required
5. Start the equipment for material handling
6. Turn off the power after processing is completed
Notice
• Power supply voltage 220V AC 50HZ before use
• Pay attention to safety during operation and avoid contact with swirling/spinning parts
• Processing capacity should not exceed 2L capacity limit
• Regularly check whether all parts of the equipment are normal
• Keep the equipment clean to avoid material residue
