Overview
HUITAI LRH-100CA cryogenic incubator is a kind of foster and storage equipment for cryogenic environment. It is widely used in the storage of foster base, serum, medicine, microbial foster, environmental testing and other fields.
Features
1. Humanized design: Large-screen LCD display, Menu-type Operating interface; Use environmentally friendly 134a without fluorine refrigerant; Mirror stainless steel liner, four corners and half arcs are easy to clean, shelf spacing is adjustable; double-decked door structure, good thermal insulation; Optional box test hole.
2. Quality assurance: using brand Compressor and self-developed cooling system; using JAKEL tube flow circulating fan and unique air duct to ensure Temperature uniformity; using international brand Humidity Sensor and built-in water tank electric heating tube humidification system to ensure Humidity deviation; PID Control mode, temperature control and humidity accurate; with 99 cycles, 30 sections per cycle of complex program control ability.
3. Safety and expansion: optional independent temperature limit alarm system, automatic interruption and sound and light alarm over temperature; optional USB or RS485 interface, connected to printer or computer to record data.
Principle
The equipment drives the refrigeration cycle through the Compressor and uses 134a refrigerant to achieve cooling. The built-in circulating fan and unique air duct structure form an air circulation system to ensure uniform temperature in the box. Humidity heats the built-in water tank through an electric heating tube to generate water vapor for humidification, which is monitored by Humidity Sensor. The PID intelligent control algorithm is used to precisely adjust the temperature and Humidity with small fluctuations. The user can set up a complex multi-stage cycle experiment process through the program controller.
Applications
Foster base storage, serum storage, drug storage, microbial foster, environmental testing
Standards
The data did not mention specific compliance criteria
Steps
The information does not provide specific operation steps, please refer to the Operation Manual attached to the equipment.
Notice
• Equipment Ambient Temperature should be between + 5~ 30 ℃.
• Power supply voltage is AC 220V 50Hz before use.
• Note that the input Power of the device is 1000W to ensure the safety of the power supply line.
• Optional accessories such as independent temperature limit controller, test hole, etc. need to be installed according to actual needs.
• When conducting experimental operation and temperature measurement, optional test holes can be used to reduce the impact on the environment in the box.
• When cleaning, please note that the liner is made of mirror stainless steel and the four corners are designed with semi-circular arcs.
• When the temperature limit is exceeded, the optional independent temperature limit alarm system will start, please deal with it in time.
