Overview
HUITAI LRH-250CA cryogenic incubator (cryopreservation tank) is a special equipment for storage of foster base, microbial foster, environmental testing, etc. Temperature range is -20~ 65 ℃, volume is 250L, humanized design and reliable quality assurance, suitable for a variety of experimental needs.
Features
1. Large-screen LCD display, multi-data one-screen display, Menu Operating interface, easy to understand
2. Use 134a without fluorine refrigerant, energy saving and environmental protection
3. Mirror stainless steel liner, four corners and half arc design is easy to clean, shelf spacing is adjustable
4. Double-decked door structure, good thermal insulation performance, observation does not affect the temperature in the box
5. Optional test holes (25mm/50mm) are available on the left side of the box, which is convenient for experimental operation
6. Adopt brand Compressor, independent research and development of cooling system, prolong Compressor life
7. JAKEL tube flow circulating fan and unique air duct to ensure Temperature uniformity
8. International brand Humidity Sensor, built-in water tank electric heating tube humidification system to ensure Humidity deviation
9. PID Control mode, temperature and humidity control accurate fluctuation
10.99 cycle programs, 30 segments per cycle, 99 hours and 99 minutes each, to meet complex experiments
11. Optional independent temperature limit alarm system, automatic interruption and sound and light alarm over temperature
12. Optional USB or RS485 interface, connect to printer or computer, record temperature parameters
Principle
The equipment adopts PID Control mode to achieve accurate temperature control through brand Compressor and self-developed cooling system. Using JAKEL tube flow circulating fan and unique air duct structure, good air circulation is formed to ensure Temperature uniformity in the box. Humidity control is realized through international brand Sensor and built-in water tank electric heating tube humidification system, which effectively guarantees Humidity deviation.
Applications
Storage foster, microbial foster, environmental testing
Steps
1. Connect power supply AC 220V 50Hz/10A
2. Set temperature, Humidity and other parameters through the large-screen LCD menu interface
3. Adjust the shelf spacing as needed
4. Start the device and monitor the running status
5. Optional connection to printer or computer to record data
Notice
• Ambient Temperature should be kept at + 5~ 30 ℃
• Power supply voltage check before use meets AC 220V 50Hz/10A requirements
• Regularly clean the mirror stainless steel liner to maintain hygiene
• Pay attention to the independent temperature limit alarm system prompt when overheating, and deal with it in time
• When selecting test holes, ensure that the installation is firm to avoid affecting the sealing
