Overview
HUITAI LRH-250CB cryogenic incubator is a specially designed equipment for laboratories, widely used in storage foster, microbial foster, environmental testing and other fields. The product adopts advanced technology, Temperature range -40~ 65 ℃, volume 250L, equipped with humanized Operating interface and high-efficiency refrigeration system to ensure the Stability and Reliability of the experimental process.
Features
1. Humanized design: large-screen LCD display, multiple sets of data one-screen display, menu-type Operating interface is simple and easy to understand; use 134a without fluorine refrigerant, energy saving and environmental protection; mirror stainless steel liner, easy to clean, adjustable shelf spacing; double-decked door structure Good insulation performance; optional test hole for experimental operation.
2. Quality assurance: brand Compressor and self-developed cooling system are used to prolong Compressor life; JAKEL tube flow circulating fan and unique air duct design ensure Temperature uniformity; international brand Humidity Sensor and built-in water tank electric heating tube humidification system ensure Humidity deviation is small; PID Control mode temperature and humidity control is accurate; 99 cycle programs, 30 sections per cycle, 99 hours and 99 minutes per section, to meet the needs of complex experiments.
3. Optional functions: independent temperature limit alarm system, automatic interruption and sound and light alarm over temperature; USB or RS485 interface can be connected to a printer or computer to record temperature parameters.
Principle
The cryogenic incubator precisely adjusts temperature and Humidity through PID Control mode, with small fluctuation. Using brand Compressor and self-developed cooling system, combined with JAKEL tube flow circulating fan and unique air duct structure, an efficient air circulation system is formed to ensure uniform temperature in the box. Humidity control is realized through international brand Humidity Sensor and built-in water tank electric heating tube humidification system, effectively maintaining the set Humidity. Optional intelligent program controller supports multi-cycle complex experimental process.
Applications
Storage foster, microbial foster, environmental testing
Steps
1. Connect the three-phase five-core AC380V 50Hz power supply.
2. Set the temperature and Humidity parameters through the large-screen LCD menu interface.
3. Adjust the shelf spacing as needed.
4. Start the device, monitor the running status, and optionally connect a printer or computer to record data.
5. Turn off the power after the experiment is completed.
Notice
• Ambient Temperature should be kept at + 5~ 30 ℃.
• Power supply voltage check before use meets the requirements of three-phase five-core AC380V.
• Regularly clean the mirror stainless steel liner to avoid contamination.
• Pay attention to the independent temperature limit alarm system prompt when overheating, and deal with it in time.
• Optional accessories such as test holes should be installed according to experimental requirements.
