Overview
HUITAI LRH-500CB cryogenic incubator (cryopreservation box) is a special equipment for storage foster, microbial foster and environmental testing. Temperature range is -40~ 65 ℃, volume is 500L, using humanized design and advanced Control system to ensure stable and reliable experimental process.
Features
1. Large-screen LCD display, multiple sets of data are displayed on one screen, and the menu-type Operating interface is simple and easy to understand
2. Use 134a without fluorine refrigerant, energy saving and environmental protection
3. Mirror stainless steel liner, four corners and half arc design is easy to clean, shelf spacing is adjustable
4. Double-decked door structure, good thermal insulation performance, observation does not affect the temperature in the box
5. Optional test hole (25mm/50mm) is available on the left side of the box.
6. Adopt brand Compressor, self-developed cooling system to extend service life
7. JAKEL tube flow circulating fan and unique air duct structure to ensure Temperature uniformity
8. International brand Humidity Sensor and built-in water tank electric heating tube humidification system ensure Humidity accuracy
9. PID Control mode, temperature and humidity control accurate fluctuation
10.99 cycles, 30 cycles per cycle, 99 hours and 99 minutes per cycle
11. Optional independent temperature limit alarm system, automatic interruption and sound and light alarm over temperature
12. Optional USB or RS485 interface to connect to printer or computer to record data
Principle
The equipment adopts PID Control mode to precisely control temperature and Humidity. Through the brand Compressor refrigeration system and JAKEL pipe flow circulating fan with unique air duct structure, the air circulation in the box is realized to ensure Temperature uniformity. The built-in water tank electric heating tube humidification system combined with Humidity Sensor effectively maintains Humidity stability.
Applications
Storage foster, microbial foster, environmental testing
Steps
1. Connect the three-phase five-core AC380V power supply
2. Set temperature and Humidity parameters through the large-screen LCD menu interface
3. Adjust the shelf spacing as needed
4. Start the device running
5. Optional connection to printer or computer to record data
6. Turn off the device after the experiment is completed
Notice
• Working Ambient Temperature should be kept within the range of + 5~ 30 ℃
• Power supply voltage is three-phase five-core AC380V 50Hz before use
• Regularly clean the mirror stainless steel liner to maintain hygiene
• Pay attention to the sound and light prompt of the independent temperature limit alarm system when overheating
• Optional accessories such as test holes, interfaces, etc. need to be configured and used on demand
