Overview
HUITAI HTZ-6090L vacuum degree digital drying oven is a professional drying equipment, widely used in biochemistry, chemical industry, agricultural research, environment protection and other fields, suitable for powder drying, baking and disinfection and sterilization of various Glass containers. Especially suitable for fast and effective drying treatment of heat sensitive, easy analysis, easy oxidation substances and complex components.
Features
1. Digital vacuum gauge automatically controls Vacuum Level, control accuracy +/- 1%, can be accurately adjusted in the range of 1.0 × 10 to 1.0 × 105 (Pa) -1
2. The heating element is located on the Shelf inside the box, and the heating time is reduced by 50% compared with the traditional Vacuum oven.
3. Special process stamping aluminum shelf, high temperature non-oxidation, fast heat conduction, reduce heat loss
4. Cuboid studio design, large effective volume utilization, accurate and reliable temperature control by microcomputer temperature controller
5. Tempered bulletproof double-decked Glass Door for easy observation, can be filled with inert gas
6. Box door closed elastic adjustable, integrally formed silicone rubber door seal to ensure high Vacuum Level
7. The studio adopts stainless steel plate, and the shell adopts Cold rolled steel plate surface electrostatic spraying
8. Work in an oxygen-free or inert gas environment to prevent oxidation
Principle
Vacuum ovens significantly reduce the boiling point of liquids by creating a vacuum environment, allowing heat-sensitive substances to dry at lower temperatures. Heating treatment under vacuum or inert gas conditions effectively shortens the drying time, avoids sample oxidation, and ensures a safe drying process.
Applications
Biochemistry, chemical industry, agricultural research, environment protection
Steps
1. Place items to be dried in the studio
2. Adjust the closure tightness of the box door
3. Set the Required Vacuum Level via Panel
4. Set temperature and time parameters
5. Start the equipment to start the drying process
6. Remove items after drying
Notice
• Please read the instructions carefully before use
• Power supply voltage meets AC220V 50Hz requirements
• Door sealing ring must be kept intact to ensure Vacuum Level
• Pay attention to operation safety when filling with inert gas
• Avoid direct contact with the surface of the box during high temperature operation
• Regularly clean the studio to maintain hygiene
