Overview
RONGJIDA LBY-IV drawing tester is suitable for tensile and bond strength testing of dry mixed mortar, thermal insulation materials, ceramic wall and floor tiles Adhesive, multi-layer architectural coatings, and building exterior putty. The tester adopts a servo Control system, which can realize uniform loading, high efficiency and good Stability, and is equipped with Touchscreen control, which has the characteristics of convenient operation and high load Measurement accuracy.
Features
1. Embedded Windows Operating system environment measurement and control software, real-time display of test data, Linear dispersion, test process automatic control, test results are automatically obtained at the end of the test, the software is easy to use
2. Multi-point uniform loading can meet different standard test requirements
3. Adopt Servo Control system to precisely control the detection process
4. Adopt Touchscreen control to facilitate human-machine dialogue
5. The testing machine is equipped with travel limit and positive and negative force value overload protection functions to prevent damage to the testing machine caused by misoperation
6. Adopt hanging type pulling head, easy and fast loading and unloading
Principle
The testing machine is driven by servo motor to achieve accurate uniform loading. Under the control of the measurement and control software, the tensile force is applied to the specimen, and the force value and displacement data are collected in real time until the specimen is damaged or reaches the preset conditions, and the test results are automatically calculated and output.
Applications
Production inspection and development research in the fields of factories, construction engineering mass inspection stations, construction companies, product mass inspection institutes, scientific research institutions, road and bridge sites, etc
Steps
1. Prepare the test piece and install it on the testing machine
2. Set test parameters (such as drawing speed) through Touchscreen
3. Start the test, and the equipment is automatically loaded at a constant speed
4. After the test, the software automatically calculates and displays the results
5. Remove the test piece and clean the equipment
Notice
* Please familiarize yourself with the instructions for using the equipment before operation
* Ensure that the specimen is firmly installed to prevent accidental peeling
* Pay attention to the equipment Travel limit to avoid exceeding Travel operation
* Pay attention to positive and negative force value overload protection to prevent equipment damage
Regular maintenance and calibrating of equipment
