Overview
The JFL AWG8-850 digital torque wrench is a powerful torque tool with a digital display for easy operation. It integrates torque setting, unit setting, mode setting, value storage and removal, value output and user correction, and is suitable for bolting and torque control in the automotive industry, machinery industry and other fields.
Features
1. Digital display torque reading value
+/-1 or 2.5% accuracy (20 to 100% of maximum operating range)
3. Can be operated clockwise and counterclockwise
4. Peak hold and real-time mode
5. Buzzer and LCD indication (when the predetermined torque value is reached)
6. Four engineering units (ft.lb, in.lb, N.m, kgf.cm)
7.100 pen can store the record value
8. Communication function
Automatic shutdown in 9.5 minutes
Principle
The digital torque wrench measures the applied torque through the built-in Sensor and displays the value in real time on the digital screen. The user can preset the target torque value, and when this value is reached, the wrench will prompt through the buzzer and LCD screen. It supports peak hold mode (recording Max. Torque value) and real-time mode (showing current torque value), and can output the measurement Data storage or through the Communication interface.
Applications
Automotive industry, machinery industry
Steps
1. Install the battery and turn it on.
2. Press the button to set the unit (N.m, in.lb, ft.lb, kgf.cm).
3. Select the operation mode (peak save P or real-time mode T).
4. Set the target torque value (the setting range of the buzzer is 42.5~ 850N.m).
5. Connect the wrench connector (3/4 inch) to the sleeve or bolt.
6. Apply torque clockwise or counterclockwise and observe the display value.
7. When the preset torque is reached, the buzzer will sound and the LCD has instructions.
8. Data can be stored (up to 100 pens), cleared, or output through communication.
Notice
• Please ensure that it is used and stored within the operating temperature range (-10~ 60 ° C) and storage temperature range (-20~ 70 ° C).
• Avoid use in environments with relative humidity above 90% and condensation.
• Note that the test height of the wrench drop is 1 meter, and avoid falling or severe impact beyond this height.
• The vibration test condition is 10G, do not use it for a long time in a strong vibration environment beyond this condition.
• The design life of the wrench is 10,000 operations, please use it reasonably to prolong the life.
• Please check the battery level before use to ensure normal display and function.
• When setting the torque value, do not exceed the range (850N.m) and the minimum setting value of the buzzer (42.5N.m).
• When not in use for a long time, please remove the battery.
