Overview
BOZHEN KRQ-250H light chamber is a new fluorine-free design equipment, equipped with a brand Compressor and circulating fan, with a large LCD screen display, easy operation, high efficiency and low energy consumption. The equipment is not only energy-saving and environmentally friendly, but also has a long service life. It also adopts a silent design to minimize Operating Noise and reduce cooling time by more than 40% compared with traditional low temperature equipment.
Features
1. The box body is sprayed with high-quality steel plate, the liner is made of mirror stainless steel, and the Shelf spacing in the box is adjustable.
2. Adopt a digital display screen for intuitive display, making it easy to observe and operate.
3. Equipped with brand Compressor and circulating motor, combined with unique air duct structure, to ensure uniform temperature and humidity in the studio.
4. Adopting the international advanced fuzzy PD intelligent temperature and humidity controller, it can control the temperature and humidity with minimal fluctuations and comes with a timing function (0-999 minutes).
5. Temperature can be set to different day and night modes depending on the availability of light.
6. Equipped with an independent temperature limit alarm system, the operation is automatically interrupted when the temperature exceeds the limit to ensure the safety of the experiment.
7. Optional RS485 interface can be connected to a computer to realize computer monitoring of the experimental process (optional).
Principle
The lighting chamber carries out cooling and air circulation through the brand Compressor and circulating fan system, combined with the unique air duct design to ensure the uniform distribution of temperature and humidity in the box. The fuzzy PD intelligent temperature and humidity controller is used for precise regulation, and the day and night temperature modes can be automatically switched according to the set light cycle (adjustable in six levels) to simulate different environment climate conditions.
Applications
Microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect and small animal feeding
Steps
1. Place the equipment in a stable and well-ventilated working environment (Ambient Temperature 5~ 30 ℃).
Connect the AC 220V 50Hz power supply.
3. Set the required temperature (10~ 50 ° C with light, 4~ 50 ° C without light), humidity (50~ 90% RH), light intensity (0~ 15000LX, six-level adjustable) and timing parameters (0~ 9999 minutes) through the large LCD screen.
4. Adjust the Shelf spacing in the box as needed and place the sample.
5. Start the device, and the device will run automatically according to the settings, enabling different temperature modes day and night.
6. During operation, the parameters can be monitored through the screen, and the power can be turned off after the experiment.
Notice
Equipment should be placed in Ambient Temperature 5~ 30 ℃, well ventilated place.
• Please use a rated AC 220V 50Hz power supply and ensure good grounding.
When setting the temperature, please pay attention to the different Temperature ranges under light and no light conditions.
The equipment is equipped with an independent temperature limit alarm system, which will automatically interrupt when overheating, but it is still necessary to check the operating status regularly.
• Continuous Operating Time is recommended not to exceed 180 hours. If you need a longer running time, please arrange the interval reasonably.
• When cleaning the liner, please use a soft cloth to wipe the mirror stainless steel to avoid the use of corrosive cleaners.
• Optional RS485 interface and computer monitoring function are optional accessories, configured on demand.
