Overview
BOZHEN LRH-350 biochemistry cultivating box is a fluorine-free design experimental equipment, using brand Compressor and circulating fan, equipped with large LCD screen, easy to operate. The product has high efficiency and low energy consumption, not only energy saving and long service life, but also low operating noise. Compared with traditional refrigeration equipment, the cooling time is reduced by more than 40%.
Features
1. Using a good mirror stainless steel liner, the box is sprayed with a good steel plate, four corners and a half arc design, easy to clean, and the Shelf spacing in the box is adjustable.
2. Equipped with intelligent digital thermostatic instrument, the interface is simple and easy to understand, easy to observe and operate.
3. Equipped with international professional fuzzy PID intelligent temperature controller, the temperature fluctuation is small, and it has a timing function (0-9999 minutes).
4. It is equipped with an independent temperature limit alarm system (optional), which automatically interrupts when the temperature exceeds the limit to ensure the safe operation of the experiment.
5. With 4~ 20mA standard current signal and RS485 interface (optional), it can be connected to a recorder and a computer to record temperature parameter changes.
6. mildew incubator is equipped with ultraviolet sterilization system, which can be disinfected regularly to effectively prevent contamination during cell fostering.
Principle
The biochemistry cultivating box works in conjunction with the brand Compressor and the circulating fan to achieve precise control of the temperature in the box. Its core is the fuzzy PID intelligent temperature controller, which can perform intelligent calculations according to the deviation of the set temperature and the actual temperature, adjust the cooling or heating output, and ensure that the temperature in the box is stable near the set value with small fluctuations.
Applications
Environmental protection, drug testing, agricultural and aquatic research, colleges and universities, production departments, water analysis and BOD determination, bacteria, molds, microorganisms foster and protect, plant cultivation, breeding experiments
Steps
1. Place the equipment in a smooth and well-ventilated working environment.
2. Connect the power supply (200V 50Hz).
3. Set the required temperature (within the range of 4 to 60 ° C) and timing time (1 to 9999 minutes) through the large LCD screen and intelligent digital thermostatic instrument.
4. Adjust the spacing of the Shelf in the box as needed.
5. Put in the sample to be fostered and close the box door.
6. Start the device and it will automatically run to the set time or temperature.
7. After use, turn off the power.
Notice
• Equipment Ambient Temperature is recommended to be between 4-35 ° C.
• Power frequency is 200V 50Hz and input power is 850W.
• Regularly clean the inside and outside of the box to maintain hygiene.
• If the temperature limit alarm system is selected, please ensure its normal function.
• When using UV sterilization function, please pay attention to safety and avoid direct exposure.
• When the equipment is running, do not switch the box door frequently, so as not to affect the temperature stability.
• Do not place flammable and explosive items in the box.
