Overview
Model S72-BG Black and Grey Grid Cardboard is a lame plating test tape produced by the LENETA brand, designed with a black and gray checkerboard pattern. Its total size is 2 x 11 inches (51 x 279 mm), and the Encasement size is 500 sheets per box, each box weighs approximately 5 pounds.
Features
1. Adopt black and gray checkerboard patterns for sharp contrast, making it easy to observe the lame plating effect.
2. Standard size design, measuring 51 x 279 mm (2 x 11 inches).
3. Encasement size is 500 sheets/box, easy to use and manage in batches.
Principle
This product is used as a lame plating test strip, and its checkerboard pattern provides a high contrast ratio test background for evaluating the performance of paint hiding power, Color, leveling and lame plating uniformity.
Applications
Coating performance testing, lame plating process evaluation, quality control
Standards
The data did not mention specific compliance criteria.
Steps
1. Prepare the paint or lame plating equipment to be tested.
2. Take out a piece of S72-BG black and gray grid paper and place it flat.
3. According to the standard lame plating process, spray the paint evenly on the checkerboard pattern area of the cardboard.
4. After the coating is dried, observe and evaluate the hiding power, Color, leveling and lame plating uniformity of the coating under Standard light source.
Notice
Please use this cardboard for testing on a flat, clean surface.
* When lame plating, please follow the relevant safety operating procedures to ensure that the environment is well ventilated.
* Test result evaluation should be done after the paint has passed through drying.
* This product is a one-time test consumable, please do not use it for repeability.
* Please store the product in a cool drying place, avoid direct sunlight and humid environment.
