Overview
The Form M33 lame plating card is a LENETA brand lame plating monitoring card with Dimensions of 2 x 2 inches (51 x 51 mm). The product is a black and white checkerboard design, type sealed, Encasement size is 500 sheets/box.
Features
1. Adopt black and white checkerboard design, which is convenient for observation and monitoring of lame plating effect.
Small size, 51 x 51 mm (2 x 2 inches), easy to use.
3. Designed for sealed lame plating monitoring.
Principle
Through its black-and-white checkerboard surface design, the product can clearly demonstrate the uniformity of coating coverage, thickness, and whether there are defects such as sag and missed spray after lame plating, thus enabling rapid monitoring and evaluation of the lame plating process.
Applications
Lame plating process monitoring, coating performance testing, sealed lame plating quality control
Standards
The information does not mention
Steps
1. Place the Form M33 lame plating card in the lame plating area to be tested.
2. Carry out lame plating on the card according to the conventional lame plating process.
3. After the lame plating is completed, remove the card.
4. Observe the paint coverage of the Checkerboard area on the card and evaluate the uniformity and thickness of lame plating.
Notice
• Please ensure that the surface of the card is clean and free of damage before use.
• When lame plating, place the cards flat to obtain accurate test results.
• After lame plating, please conduct a professional evaluation according to the effect displayed on the card.
• Please keep unused cards safe to avoid moisture or contamination.