Overview
YDX digital display reflective 65 Thermometric Paper is a digital display reflective temperature measuring patch, the size is 2.5 × 2.5 cm/piece, and each piece corresponds to a single temperature of 65 ° C. The product is equipped with an anti-fouling protective film, which has anti-fouling and waterproof characteristics. There is a digital display window in the center. After overheating, the white display window shows white characters on a black background. The Cube border Color is red (or yellow and green), which is both eye-catching and can be used as a three-phase sequence indicator color of the power bus. The border adopts professional regression directional reflection technology, which is convenient for low-light remote inspection and fault point finding. The reflective effect is similar to that of highway signs. Strong reflection helps to quickly locate the temperature measurement point when irradiated with a flashlight at night.
Features
1. Digital display reflective design, white characters on a black background of the display window are clearly visible after overheating
2. The frame adopts regression directional reflection technology, which is easy to identify at a long distance under low light
3. Stain-resistant and waterproof, with anti-fouling protective film
4. Color of the border is eye-catching, which can be used as a power bus three-phase sequence indicator
5. Strong reflection of flashlight at night, easy to quickly locate the temperature measurement point
6. Suitable for indoor and outdoor applications
Principle
Thermometric Paper works on the principle of irreversible discoloration. When the Ambient Temperature reaches a preset 65 ° C, the center digital display window changes from white to white on a black background, which intuitively displays the over-temperature status. The regression-oriented reflection technology of the border enhances visibility in low light conditions and assists inspection.
Applications
Power bus inspection, industrial equipment temperature monitoring, fault point finding
Steps
1. Clean and drying the tested surface
2. Tear off the temperature measurement paper adhesive protective film
3. Paste Thermometric Paper in the monitoring position
4. Regular inspection to observe the status of the display window
5. If the display window changes to white characters on a black background, it indicates overtemperature
Notice
• Each Thermometric Paper is a single temperature of 65 ° C, irreversible discoloration
• Make sure the surface is clean and drying before pasting
• Avoid use in strong corrosion environments
• Pay attention to the reflective characteristics of the frame during inspection to assist in positioning
• Need to replace the Thermometric Paper after overheating