Overview
Temperature measurement paste 50 is a temperature-sensitive discoloration paint of the YDX brand. It is a white paste-like slime and is suitable for measuring temperature on the surface of cable joints and other equipment, including rough or oily surfaces. After overheating, it changes from white to transparent. The discoloration is irreversible. Color changes according to the rated temperature. Plastic bottle, Net weight 100 grams, available in a variety of temperature grades.
Features
1. Temperature sensitive discoloration function, Color changes from white to transparent after overheating, irreversible.
2. Wide applicability, can be used for rough, uneven or oily surfaces.
3. A variety of temperature grades are available, such as 55 ° C, 60 ° C, etc.
4. Easy to apply, can be used with a brush, finger or tool.
5. The discoloration effect is obvious, especially on dark surfaces.
Principle
Temperature measurement paste is a temperature-sensitive discoloration paint. After applying, it is initially translucent and light white, and after drying, it becomes white. When the temperature exceeds the rated value, the essential Color of the paint changes from white to transparent, and the discoloration is irreversible. The effect Color depends on the surface Color of the object to be measured.
Applications
Cable connector, equipment surface temperature measurement
Steps
1. Shake well up and down before use, and stir with a fine stick if necessary to make the paste uniform.
2. Dip a small amount of temperature measurement paste with a brush, finger or brush, and apply it evenly to the surface of the tested object. The coating should not be too thick.
3. If the paste is sticky and not easy to apply, you can add a small amount of water to mix evenly.
4. The paste can be poured into a small bowl for easy use, applied directly or prepared with water.
5. To enhance the discoloration effect, it is recommended to use on dark surfaces or apply dark paints locally.
Notice
This product is suitable for indoor applications.
The appropriate temperature for storage is 6-25 degrees.
• Irreversible discoloration after overheating.
• In order to enhance the discoloration effect, the surface of the measured object is preferably dark.
• The coating should not be too thick, it is translucent and light white when initially coated, and white after drying.
