Overview
Temperature measurement paste 70 is a temperature-sensitive discoloration paint of the YDX brand. It is a white paste-like slime, suitable for measuring temperature on the surface of equipment such as cable joints, including rough or oily surfaces. After overheating, it changes from white to transparent (the discoloration effect depends on the surface Color). The discoloration is irreversible and varies according to the rated temperature. Plastic bottle, Net weight 100 grams, temperature grades include 55 ° C to 120 ° C, etc.
Features
1. Wide range of applications, can be used for rough, uneven or oily surfaces.
2. The discoloration is irreversible, and it changes from white to transparent after overheating, and the effect is obvious.
3. A variety of temperature grades are available, such as 55 ° C, 60 ° C, 65 ° C, 70 ° C, 75 ° C, 80 ° C, 85 ° C, and 120 ° C.
4. Easy to apply, can be dipped in a brush, finger or tool, the coating is thin and can be prepared with water.
5. The discoloration effect can be enhanced by using dark surfaces or with paints.
Principle
Temperature measurement paste 70 is a temperature-sensitive discoloration paint. Color changes from white to transparent when it is over-heated, and discoloration is irreversible. Color changes are graded according to the rated temperature, and the visual effect after discoloration depends on the surface Color of the measured object.
Steps
1. Shake well up and down before use, and stir with a fine stick if necessary to make the paste uniform.
2. Dip a small amount of paste in a brush, finger or brush and apply it evenly to the tested surface. The coating should not be too thick.
3. The initial coating is translucent light white, and it turns white after drying.
4. If the paste is sticky and not easy to apply, you can add a small amount of water to prepare it evenly.
5. For convenience of use, pour the paste into a small bowl and apply or prepare it directly.
Notice
• The discoloration is irreversible after overheating, and the essential Color changes from white to transparent.
• In order to enhance the discoloration effect, the tested surface should be dark, or paint dark paints on the light-colored surface or paste them in time.
• This product is suitable for indoor applications, and the suitable storage temperature is 6-25 ° C.
• The smear method can be sheet, point or written character graphics to optimize the effect.
