Overview
LIULING CH-10-AT (10mm) asphalt waterproof membrane thickness gauge is an instrument for measuring the thickness of rubber and plastic products. It has the characteristics of simple structure, convenient use and reliable mass. The thickness gauge has two specifications: hand type and Benchtop. The hand type can be carried with you. The handheld measurement is suitable for on-site measurement in the workshop, and the Benchtop can be used in the physical laboratory for sample measurement.
Features
1. Simple structure, easy to use and reliable mass
2. Provide two specifications of hand and Benchtop
3. The hand-held thickness gauge is easy to carry and suitable for on-site use in the workshop
4. Benchtop thickness gauge is suitable for physical laboratory environment
5. High Measurement accuracy, Small Graduation
Principle
The thickness gauge applies a standard pressure of 22kPa +/- 2kPa to the sample through the upper probe to measure the thickness of materials such as rubber and plastic products, and displays the measurement results through Dial readings.
Applications
Rubber thickness measurement, plastic product thickness measurement, asphalt waterproof membrane thickness measurement
Standards
HG/T 2041-2009、HG/T 2198-2011、HG/T 2382-1992
Steps
1. Select Hand or Benchtop Thickness Gauges
2. Place the thickness gauge on the surface of the sample to be tested
3. Ensure that the upper probe is in full contact with the sample
4. Read the thickness value displayed by the pointer
5. Record measurement results
Notice
• Check whether the thickness gauge is in good condition before use
• Ensure that the probe is in full contact with the sample surface during measurement
• Keep the thickness gauge clean to avoid affecting Measurement accuracy
Periodically calibrated to ensure measurement accuracy
• Apply the specified pressure according to the standard requirements
