Overview
The LIULING CH-10 Rebound Hand Thickness Gauge is a special instrument for measuring the thickness of rubber and plastic products. It has the characteristics of simple structure, easy use and reliable mass. The instrument is available in two specifications: hand and Benchtop. The hand can be carried with you for on-site measurement in the workshop, and the Benchtop is suitable for sample determination in the physical laboratory.
Features
1. Simple structure, easy to use and reliable mass
2. Provide two specifications of hand and Benchtop
3. Handheld design for easy portability and on-site measurement
4. Dial reading display, Graduation accuracy to 0.001mm
5. The probe is designed with a φ 20mm plane
6. Maximum measurement depth up to 45mm, especially suitable for flannel thickness measurement
Principle
Measurement principle of rebound type is adopted in the thickness gauge. The Dial display system is used to accurately read the thickness value through the contact between the probe and the material to be measured.
Applications
Rubber thickness measurement, plastic product thickness measurement, flannel thickness measurement, workshop site measurement, physical laboratory sample measurement
Standards
HG/T 2041-2009 "Technical Conditions for Rubber Thickness Gauge", HG/T 2198-2011 "General Requirements for Physical Test Methods for Vulcanized Rubber", HG/T 2382-1992 "General Technical Conditions for Rubber Testing Instruments and Equipment"
Steps
1. Measuring location
2. Smooth contact of the probe with the surface of the tested material
3. Read the thickness value displayed by the pointer
4. Record measurement results
5. Clean the probe and keep the instrument properly
Notice
• Make sure the probe is clean and pollution-free before measurement
• Keep the probe in vertical contact with the measured surface during measurement
Avoid measurements in vibrating or unstable environments
• Clean and store the instrument properly after use
• Regularly check instrument accuracy to ensure measurement accuracy
