Overview
The NIRUN NTV-S2 Smart Touch Digital Viscometer is an advanced viscosity measurement device with a 7 inch wide Touchscreen, anti-static housing and metal lift rod design, built-in RTD temperature sensor, support for a variety of Viscosity units and Measurement modes.
Features
1.7 inch wide Touchscreen, easy to operate, rich display information
2. Anti-static shell, metal lifting rod design
3. Built-in RTD temperature sensor
4. ARM chip processor, faster data processing speed
5. Durable new small shaft design
6. Powerful human-machine interaction interface
7. Gigabit network port data communication transmission, fast and reliable data transmission
8. Support external U disk Data storage; single point, continuous, timing three storage methods optional
9. Password protection for temperature and viscosity correction coefficients, allowing users to correct temperature and viscosity correction coefficients by themselves with reliable and accurate data
10. Support stepless speed measurement viscosity, input any Rotation speed, directly reflect the full scale under each rotor, convenient for users to select test conditions
11.Automatic conversion of dynamic viscosity and kinematic viscosity
12. Viscosity unit interchangeability
13. Interchange of a variety of user-friendly operation styles
14. Random with powerful operation wizard help
15. Viscosity values show continuous change
16. Measurement range beyond the alarm sound prompt
17. Computer full-scale linear correction
18. AC Power Adapter 100V-240V, good anti-interference
Principle
The Viscometer calculates the viscosity value by swirling/spinning the rotor in the sample, measuring the fluid resistance, the built-in RTD temperature sensor monitors the temperature in real time, the ARM chip processes the data quickly, and realizes the automatic conversion of dynamic viscosity and kinematic viscosity and the exchange of various units.
Applications
Inks, emulsions, solvent adhesives, polymer solutions, petroleum, paints, solvents, cosmetics, milk products, products, fruit juices
Steps
1. Connect the Power Adapter and turn it on
2. Select the rotor and install it
3. Measurement parameters such as Rotation speed and unit settings via Touchscreen
4. Measuring location of samples
5. Start the measurement and observe the continuous change of the viscosity value
6. Save the data to the U disk or transfer it through the interface as needed
7. Clean the rotor after measurement
Notice
• Power supply voltage in AC100V-240V range
• Check whether the rotor is firmly installed before measurement
• Avoid exceeding 1~ 6000000mPa · s Measurement range, otherwise the alarm will be triggered
• Clean rotors and equipment promptly after use
• Pay attention to password protection when correcting temperature and viscosity coefficients based on reliable data
• Pay attention to environment interference to ensure anti-interference performance
