Overview
FANGRUI HDC-0506 Low Temperature Circulating Bath adopts high-performance single-chip microcomputer control, self-tuning PID adjustment, imported temperature sensor temperature measurement, high temperature control accuracy and small Fluctuation. Using a good refrigeration Compressor, high cooling efficiency and low noise. Using a good full sealing stirring motor, low noise and long life. HDC series adopts two sets of light-emitting digital tubes to display the set temperature and actual temperature respectively. The product has accurate temperature control, complete functions, stability and reliability, and is easy and safe to operate.
Features
1. Using high-performance single-chip microcomputer control, PID adjustment, self-tuning control technology, high temperature control accuracy and short Stabilization time.
2. It has a break-even protection function to prevent the instrument from losing control.
3. There is a liquid level protection device, which can effectively prevent various faults caused by the air burning of the heating pipe.
4, the upper limit over-temperature alarm function, can be set by yourself, beyond the range, immediate alarm.
5. The instrument works stably and reliably, making it very convenient to operate.
6, liner, table and all parts immersed in liquid are high-mass stainless steel, corrosion resistance, easy to clean.
7, HDC series is High Accuracy low temperature constant temperature bath, temperature control accuracy of 0.01 ℃, Fluctuation of 0.01 ℃, Temperature range from -19.99 ℃~ 99.99 ℃, capacity integral 6 liters, 15 liters, 20 liters, 30 liters.
8, the series of low temperature constant temperature bath can be directly in the water tank thermostatic test, can also use the external circulation function, through the hose connected to the Miscellaneous equipment, the controlled thermostatic liquid in the tank to the Miscellaneous equipment.
Principle
The product adopts high-performance single-chip microcomputer control, through self-tuning PID adjustment technology, combined with imported temperature sensors for accurate temperature measurement, to achieve precise control of the temperature in the Tank. At the same time, the Compressor refrigeration system is used to cool down, and the liquid temperature in the tank is uniform through the fully sealed stirring motor. With internal/external circulation function, the thermostatic liquid can be guided to external equipment.
Applications
Bioengineering, Food, Chemical, Metallurgy, Chemical Analysis, Petroleum, Research Institute, Colleges and Universities, Factory Laboratory, Quality control department
Steps
1. Ensure that the instrument is placed smoothly and connected to the power supply.
2. Check the liquid level in the Tank to ensure that it is not lower than the minimum requirement.
3. Set the required temperature through the digital display panel.
4, start the instrument, start cooling or heating, thermostatic control.
5. You can choose to test directly in the inner tank, or connect the hose to enable the external circulation function to guide the thermostatic liquid to the Miscellaneous equipment.
6. After use, turn off the power supply for cleaning and maintenance.
Notice
Please read the instructions carefully before use.
• Ensure that the liquid in the Tank is sufficient to avoid the heating tube burning.
• Pay attention to the set temperature limit to prevent over-temperature alarm.
• The instrument should be placed on a well-ventilated and stable countertop.
• When performing external circulation operations, please ensure that the connecting pipeline is unobstructed and well sealed.
• When cleaning, use a soft fabric to avoid scratching the stainless steel surface.
• If not in use for a long time, empty the tank and keep drying.
