Overview
OSP-38 L2000φ 16 formed steel wire coating bar is a professional Spreader tool produced by the Japanese OSP brand. It is made of 304 stainless steel and extrusion process, and the surface is chrome-plated. This product is designed to replace the traditional steel wire coating bar to solve the problems of loose steel wire, broken wire, difficult to clean and unable to freely change the surface shape. It can precisely control the wet film thickness to 1.5μm to achieve ultra-thin Spreader.
Features
1. Made by extrusion process to avoid the problem of loose wire and broken wire of traditional steel wire coating bar.
2. Easy to clean, not easy to clog, improve efficiency.
3. The surface shape can be freely changed to adapt to different Spreader requirements.
4. The bottom of the groove is wider, and the Coating Weight is generally larger than the traditional steel wire coating bar.
5. Accurate wet film thickness control, up to 1.5μm minimum, support ultra-thin Spreader.
6. Specifications and lengths can be customized to meet customer needs.
Principle
Spreader liquid on the substrate surface, using D-Bar formed wire coating bar to adjust (scrape off) the amount of liquid, through its groove design precise control of wet film thickness, to achieve uniform Spreader.
Applications
Film, Glass, Paper, Encasement Material, Tape, Magnetic Card
Steps
1. Spreader liquid on the substrate surface.
2. Use D-Bar formed wire coating bar to scrape off excess liquid and adjust Coating Weight.
Notice
• Make sure the surface of the substrate is clean before use to avoid impurities affecting the Spreader effect.
• Select the appropriate D-Bar specification according to the needs of Spreader, and consult customer service for customization if necessary.
• Wash in time after use to prevent liquid residue from causing blockage.
• Avoid excessive force scraping to avoid damage to the coating bar or substrate.
