Overview
SZQ-25 Film Applicator is a SHIBO brand product, suitable for wet-film with the specified thickness of Spreader, used to determine the hiding power, color folding or preparatory sample of the sample. The Applicator is made of stainless steel wear-resistant material, and the application width is not less than 100mm.
Features
1. Stainless steel wear-resistant material
2. The application width is not less than 100mm
3. Provide a variety of film thickness options: 25μm, 37.5μm, 50μm, 75μm, 100μm, 125μm, 150μm, 200μm, 250μm, 300μm, 400μm, 500μm, 600μm, 1000μm, 2000μm
Principle
By placing the Applicator on a fixed template, a wet-film of a predetermined thickness is formed on the template at a uniform speed after the front Spreader specimen.
Steps
1. Place the template on the platform and fix it to ensure that the Applicator does not move when swiping
2. Place the Applicator in a position close to and parallel to the short side of the template
3. Approximately five milliliters of specimen in front of the Applicator
4. Press and hold both ends of the Applicator with your finger
5. Spreader at a constant speed of 150 mm per second into the desired wet-film
Notice
• Wash and dry with solvent after use
• Apply anti-rust oil or neutral Vaseline and store
