Overview
SZQ-100 Film Applicator is a SHIBO brand product, suitable for wet-film with the specified thickness of Spreader to determine the hiding power, color folding or preparatory sample of the sample. The Applicator is made of stainless steel wear-resistant material, and the application width is not less than 100mm.
Features
1. Made of stainless steel wear-resistant material
2. The application width is not less than 100mm
3. Provide a variety of film thickness options: 25μm, 37.5μm, 50μm, 75μm, 100μm, 125μm, 150μm, 200μm, 250μm, 300μm, 400μm, 500μm, 600μm, 1000μm, 2000μm
Principle
The Film Applicator uniformly Spreaders the specimen of the front Spreader into a wet-film of the desired thickness for subsequent testing or sample preparation by crossing at a uniform speed on a fixed template.
Steps
1. Place the template on the platform and fix it to ensure that the Applicator does not move when swiping
2. Place the Applicator in a position close to and parallel to the short side of the template
3. Approximately five milliliters of specimen in front of the Applicator
4. Press and hold both ends of the Applicator with your finger and swipe at a constant speed of 150 mm per second
5. Wash and dry with solvent after use, apply anti-rust oil or neutral Vaseline and store
Notice
• Wash and dry with solvent after use
• Apply anti-rust oil or neutral Vaseline and keep it properly
• Applicator must not be moved
• It needs to be passed at a constant speed of 150 millimeters per second
