Overview
The SZQ-125 Film Applicator is produced by SHIBO and is suitable for wet-film of the specified thickness of the Spreader to determine the hiding power, color folding or preparatory sample of the sample. The Applicator is made of stainless steel wear-resistant material, the application width is not less than 100mm, and the wet film thickness is 125μm.
Features
1. Made of stainless steel wear-resistant material to ensure durability;
2. The application width is not less than 100mm, providing standard Spreader range;
3. Provide a variety of film thickness options, including 25μm to 2000μm, to meet different testing needs.
Principle
Film Applicator by placing the Applicator on a fixed template, after the front Spreader specimen, at a speed of 150 mm per second uniform across, thereby forming a predetermined thickness of wet-film.
Steps
1. Place the template on the platform and fix it to ensure that the Applicator does not move when swiping;
2. Place the Applicator in a position close to and parallel to the short side of the template;
3. Approximately five milliliters of specimen in front of the Applicator;
4. Press and hold both ends of the Applicator with your finger, swipe at a constant speed of 150 mm per second, and Spreader into the desired wet-film;
5. Wash and dry with solvent after use, apply anti-rust oil or neutral Vaseline and store.
Notice
- Wash and dry with solvent after use;
Apply anti-rust oil or neutral Vaseline and store it.
- Ensure that the template is fixed and the Applicator cannot be moved when it is scratched;
- Spreader speed must be maintained at a constant speed of 150mm per second.
