Overview
The SZQ-300 Film Applicator is made by SHIBO and is suitable for wet-film of the specified thickness of the Spreader to determine the hiding power, color folding or preparatory sample of the sample. The device is made of stainless steel wear-resistant material, the application width is not less than 100mm, and a variety of film thickness options are available.
Features
1. Made of stainless steel wear-resistant material to ensure durability;
2. The application width is not less than 100mm to meet a variety of application requirements;
3. A variety of film thickness options are available, including 25μm, 37.5μm, 50μm, 75μm, 100μm, 125μm, 150μm, 200μm, 250μm, 300μm, 400μm, 500μm, 600μm, 1000μm, 2000μm.
Principle
The Film Applicator secures the template to the platform, and the Applicator is placed near the short side of the template. Spreader about five milliliters of the sample in front of the Applicator, and then swipe it at a uniform speed of 150 millimeters per second, so that the Spreader becomes a wet-film of the desired thickness.
Steps
1. Place the template on the platform and fix it to ensure that the Applicator cannot be moved when it is scratched;
2. Place the Applicator in a position close to and parallel to the short side of the template;
3. Approximately five milliliters of specimen in front of the Applicator;
4. Press and hold both ends of the Applicator with your finger and swipe at a constant speed of 150 mm per second;
5. Wash and dry with solvent after use, apply anti-rust oil or neutral Vaseline and store.
Notice
- Wash and dry with solvent after use;
Apply anti-rust oil or neutral Vaseline and store.
