Overview
The SZQ-400 Film Applicator is produced by SHIBO and is suitable for wet-film with the specified thickness of Spreader. It is used to determine the hiding power, color folding or preparatory sample of the sample. The device is made of stainless steel wear-resistant material, and the application width is not less than 100mm. It provides a variety of film thickness specifications.
Features
1. Stainless steel wear-resistant material to ensure durability
2. The application width is not less than 100mm to meet the standard test requirements
3. Provide a variety of film thickness specifications: 25μm, 37.5μm, 50μm, 75μm, 100μm, 125μm, 150μm, 200μm, 250μm, 300μm, 400μm, 500μm, 600μm, 1000μm, 2000μm
Principle
By the Applicator is placed on a fixed template, after the Spreader specimen in front of the Applicator, at a uniform speed across the surface to form a predetermined thickness of wet-film coating.
Steps
1. Place the template on the platform and fix it to ensure that the Applicator does not move when swiping
2. Place the Applicator close to and parallel to the short side of the template
3. Approximately five milliliters of specimen in front of the Applicator
4. Press and hold both ends of the Applicator with your finger
5. Spreader at a constant speed of 150 mm per second into the desired wet-film
Notice
• Wash and dry with solvent after use
• Apply anti-rust oil or neutral Vaseline and store
