Overview
The SZQ-1000 Film Applicator is produced by SHIBO and is suitable for wet-film with the specified thickness of the Spreader, which is used to determine the hiding power, color folding or preparatory sample of the sample.
Features
1. Made of stainless steel wear-resistant material
2. The application width is not less than 100mm
3. Provide a variety of film thickness options, including 25μm, 37.5μm, 50μm, 75μm, 100μm, 125μm, 150μm, 200μm, 250μm, 300μm, 400μm, 500μm, 600μm, 1000μm, 2000μm
Principle
By placing the Applicator on a fixed template, after the Spreader specimen in front of the Applicator, a wet-film of a predetermined thickness is formed by crossing the surface of the template at a uniform speed.
Steps
1. Place the template on the platform and fix it to ensure that the Applicator does not move when swiping
2. Place the Applicator in a position close to and parallel to the short side of the template
3. Approximately five milliliters of specimen in front of the Applicator
4. Press and hold both ends of the Applicator with your finger, swipe at a constant speed of 150 mm per second, and Spreader into a wet-film.
5. Wash and dry with solvent after use, apply anti-rust oil or neutral Vaseline and store
Notice
• Wash and dry with solvent after use
• Apply anti-rust oil or neutral Vaseline and store
