Overview
PG-2C type metallographic sample polishing machine is a YUZHOU brand metallographic sample preparation equipment. In the metallographic sample preparation process, polishing is a main process. After polishing the polished sample on the polishing machine, a mirror-like surface can be obtained. The product is a classic double-disc design, which can be operated independently by double persons at the same time. It is equipped with a polishing water supply system and a drawer-type sewage accumulation box that is easy to clean. It has the advantages of smooth transmission, low noise, easy operation and maintenance. The diameter of the polishing plate is large, which is suitable for polishing requirements of various materials.
Features
1. Double disc independent operation, can be operated by double person at the same time
2. Equipped with a polishing water supply system
3. Easy-to-clean drawer cans
4. Smooth transmission and low noise
5. Easy to operate and maintain
6. Large diameter of the throwing plate, suitable for polishing requirements of various materials
Principle
The polishing machine is driven by a motor, and the sample is polished on the polishing plate. It is equipped with a water supply system to provide the necessary chilling down and lubrication for the polishing process. After polishing, the sample can obtain a bright mirror-like surface.
Applications
Metallographic specimen prepative
Steps
1. Connect the 380V three-phase four-wire power supply
Step 2 Start the device
3. Place the polished sample on a plate for polishing
4. Use a water supply system to assist in the polishing process
5. Turn off the equipment after polishing
6. Regularly clean the drawer container
Notice
• Make sure the power supply is 380V three-phase four-wire before use
• Pay attention to safety protection during operation
• Regularly clean the sump to keep the equipment clean
• Operate and maintain equipment according to specifications
