Overview
YUZHOU YMP-2A type four-speed Metallographic polish-grinding machine is a grinding polishing equipment controlled by a single chip microcomputer. The fuselage is integrally formed of ABS material, with novel and beautiful appearance, anti-corrosion and durability; the solid large-scale support chassis design ensures precise rotation equilibrate degree; the second gear four-speed control of the grinding disc is convenient to use; the motor noise is low and the grinding disc rotates smoothly; the spindle leak-proof design ensures almost no damage to the bearing; equipped with a chilled down water pipe, which can adjust the swirl/spin direction for wet grinding; equipped with the bottom flushing function of the grinding disc to prevent the accumulation of grinding materials. When using, only need to replace the sandpaper and polishing cloth, you can complete the rough grinding, fine grinding and polishing of various samples Each process is a satisfactory metallographic sample preparation equipment in the laboratory.
Features
1. Adopt single-chip microcomputer control, easy to operate
2. The fuselage ABS material is integrally formed, anti-corrosion and durable
3. Firm large support chassis design to ensure precision rotation equilibrating degree
4. Grinding disc second gear four speed control, Rotation speed optional 300/500/600/1000rpm
5. Low motor noise and smooth grinding disc rotation
6. Spindle leak-proof design, bearings will hardly be damaged
7. Equipped with chilled down water pipe, can adjust swirl/spin direction for wet grinding
8. Equipped with grinding disc bottom flushing function to prevent grinding accumulation and settling
9. Digital tube display, membrane button operation
10. Only need to replace the sandpaper and throw cloth to complete the coarse grinding, fine grinding and polishing processes
Principle
Rotation speed swirl/spin is controlled by single chip microcomputer to grind and polish the metallographic specimen using sandpaper or cloth. Wet grinding operation can be realized by chilling down water pipe, and the bottom flushing function of the grinding disc can remove the grinding material to ensure the mass of the sample.
Applications
Metallographic specimen preparation, laboratory sample preparation
Steps
1. Rotation speed as needed
2. Install the corresponding sandpaper or cloth
3. Turn on the equipment for grinding or polishing
4. Use chilled down water pipe for wet grinding operation
5. Use the grinding disc bottom flush function to remove the grinding material
6. Turn off the equipment after completing the sample preparation
