YUZHOU QG-1 Metallographic Specimen Cutting Machine, Fixture, Manual Cutting 50mm Section

Name: YUZHOU QG-1 Metallographic Specimen Cutting Machine, Fixture, Manual Cutting 50mm Section
Brand: YuZhou
SKU: NB020253
Price: 732.0 USD
Availability: InStock

$ 732.00Ex works

Using 2800rpm Rotation speed and 2.2kW Power, equipped with fast fixture and chill down system, can cut 50mm cut sample, easy operation and maintenance.

Model

QG-1

Get Quote

Category : Metallographic Cutter

Brand : YuZhou

SKU : NB020253

Service :The delivery and service By NBCLab.Com

Overview

QG-1 metallographic sample cutting machine is the first important process equipment for metallographic sample preparation. It uses high-speed swirl/spin Resin abrasive wheels to intercept the sample, and is equipped with a chill down device to prevent external water from burning the sample tissue during cutting. Widely used in metallographic laboratories, it is very convenient to operate, use and maintain.

Features

1. High-speed swirling/spinning Resin abrasive wheels are used for cutting; 2. Equipped with a chilling down device to connect to an external water source; 3. It is very convenient to operate and maintain; 4. The cutting fixture is a fast fixture with a jaw height of 50mm.

Principle

Manual Y feed cutting is performed by high speed swirl/spin Resin abrasive wheels, and the cutting area is chilled down with an external water source using a chill down device to prevent tissue burns.

Applications

Metallographic Laboratory

Steps

1. Install Resin abrasive wheels; 2. Start the chilling down device with an external water source; 3. Fix the sample with a quick clamp; 4. Cut in the Y direction manually; 5. Turn off the power and water source after the cutting is completed.

Notice

• Ensure that the power supply is 380V, 50Hz, 8A three-phase four-wire; • Check whether the abrasive wheels are firmly installed before cutting; • Be sure to turn on the chill down device when cutting; • The maximum cutting section does not exceed 50 * 50mm; • Pay attention to safety protection during operation.

Cutting method
Manual, feed in Y direction
Cutting blade Size
Φ300*2*Φ32mm
Maximum cutting section
50*50mm
Rotation speed of spindle
2800 rpm
Motor Power
2.2 kW
Cutting fixture
Threaded fixture or quick fixture, jaw height 50mm
Input power
380V, 50Hz, 8A, three-phase four-wire
Dimension
740*465*390mm
weight
70 kg

[Q] Is the price listed on the website the final cost for overseas purchases?

[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.

[Q] What is the specific process for purchasing the product?

[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.

[Q] What should I do if the instrument I purchase needs repair?

[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.