LEICI JPBJ-608 Portable dissolved oxygen Analyzer Polarography dissolved oxygen measurement high definition LCD IP65 protection

Name: LEICI JPBJ-608 Portable dissolved oxygen Analyzer Polarography dissolved oxygen measurement high definition LCD IP65 protection
Brand: LeiCi
SKU: NB020264
Price: 674.0 USD
Availability: InStock

$ 674.00Ex works

Polarography dissolved oxygen Measurement range 0.00~ 50.00mg/L, Response Time ≤ 45s, support automatic temperature compensation and salinity compensation, with IP65 Protection Rating, Data storage 500 sets and GLP standards.

Model

JPBJ-608

Get Quote

Category : Water Quality Tester

Brand : LeiCi

SKU : NB020264

Service :The delivery and service By NBCLab.Com

Overview

The LEICI JPBJ-608 Portable dissolved Oxygen Tester is a Portable Instrument with Polarography dissolved Oxygen electrode, equipped with 1 meter cable, supports accurate measurement of dissolved oxygen, dissolved oxygen percentage and temperature. The instrument features a high definition LCD screen with intelligent detection, data management and power management for rapid on-site detection.

Features

1. Adopt high definition LCD screen, clear display 2. Temperature units available: ° C and ° F 3. Support boot self-diagnosis, automatic shutdown, power-off protection and factory reset 4. Support firmware upgrade function, allowing function expansion and personalized requirements 5. Support IP65 Protection Ratings 6. Polarography dissolved Oxygen electrode, Electrode hanger, Silicone protective cover, Wristband, Portable suitcase 7. Intelligent determination of endpoints, support automatic readings, timed readings, timed interval readings, manual readings 8. Support automatic temperature compensation, automatic atmospheric pressure compensation (kPa, mmHg, atm multiple units optional) 9. Automatic zero oxygen calibration and full scale calibration 10. Support manual salinity compensation 11. Data storage (500 sets each), access, delete, transfer and print 12. Compliant with GLP for data traceability 13. Support connecting standard RS-232 serial printer, directly print measurement results, print format optional 14. With USB interface, it is connected to the PC through dedicated communication software to achieve data transmission 15. Large-capacity lithium battery power supply, support connecting PC and mobile power supply charging 16. With battery undervoltage reminder function and charging status reminder function 17. Support backlight adjustment

Principle

Polarography dissolved Oxygen electrode is used for measurement, and the dissolved Oxygen concentration in water samples is detected by electrochemistry principle. The instrument automatically performs temperature compensation and atmospheric pressure compensation to ensure measurement accuracy, and supports intelligent end point discrimination and multiple reading modes.

Steps

1. Power-on self-diagnosis 2. Select Measurement mode (automatic reading, timed reading, timed interval reading or manual reading) 3. Perform automatic zero oxygen calibration and full scale calibration 4. Set the temperature unit, atmospheric pressure unit or manual salinity compensation as needed 5. Electrode immersion in water sample to be tested 6. Read measurement results 7. Data storage or transmission 8. Automatic shutdown or manual shutdown after use

Notice

• Make sure the battery is fully charged before use, and pay attention to the under-voltage reminder • Electrode must be completely immersed in water sample during measurement to avoid bubble interference • Regular zero oxygen and fullness calibration to ensure accuracy • Use the specified interface and software when connecting to a printer or PC • Use standard silicone protective cover and carry case for storage and transportation • Follow the operation guide when upgrading firmware • Pay attention to the applicable conditions of IP65 Protection Rating and avoid using beyond the range

DO Measurement Range
0.00~50.00 mg/L
DOS resolution
0.01 mg/L
DO Electronic Unit Indication Error
±0.10 mg/L
DOS Indication Error
≤20.00mg/L：±0.30 mg/L；＞20.00mg/L：±10.0%
DO Response Time
≤ 45s (90% Response at 20.0 ° C)
DO salinity compensation error
±2%
Saturation Range
0.0~300.0 %
Saturation minimum resolution
0.10 %
Saturation Electronic Unit Indication Error
±2.0 %
Saturation Instrument Indication Error
±10.0 %
Temperature Range
-5.0~110.0℃ / 23.0-230.0 ℉
Temperature resolution
0.1 ℃ / 0.1 ℉
Temperature Electronic Unit Indication Error
±0.2 ℃
Temperature Instrument Indication Error
+/- 0.4 ° C (0.0 ° C -60.0℃）； +/- 1.0 ° C (Miscellaneous Range)
power supply
Rechargeable Lithium Battery, Power Adapter (Input: AC100~ 240V, Output: DC5V)
Size
80*225*35mm
weight
0.4 kg

[Q] Is the price listed on the website the final cost for overseas purchases?

[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.

[Q] What is the specific process for purchasing the product?

[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.

[Q] What should I do if the instrument I purchase needs repair?

[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.