Overview
The HANNA HI9350011 Thermometer is a High Accuracy Portable temperature measuring device designed for industries with strict requirements for measurement accuracy. Equipped with the FC766C1 Ultra Fast Response Replaceable K-Type Stainless Steel Penetration Probe, it has a Response Time of only 4 seconds, and features CAL Check ™ calibrate inspection and Battery Error Prevention System (BEPS) to ensure the accuracy and Reliability of measurement. It is suitable for sample temperature determination in factories, Food processing and other scenarios.
Features
Wide and accurate temperature measurement range: covering -50.0 to 300 ° C and -58.0 to 572 ° F.
2. Fast Response: Standard Probe Response Time is only 4 seconds.
3. High Protection Rating: Comply with IP65 international waterproof standard.
4. Intelligence system: built-in CAL Check ™ calibrate check function and battery error prevention system (BEPS).
5. Flexible power management: Provide 8 minutes, 60 minutes or disable three automatic shutdown modes.
6. Probe replaceable: FC766C1 Probe is a replaceable design with a wire length of 1 meter.
Principle
The thermometer works based on the Thermocouple principle. The K-type Thermocouple Probe generates a corresponding micro-voltage signal when it senses temperature changes, and the circuitry inside the instrument accurately converts this electrical signal into a temperature reading and displays it. The CAL Check ™ function can quickly calibrate the instrument to ensure the accuracy of the measurement reference.
Applications
Factory, Food processing industry, Sample temperature determination
Standards
IP65 waterproof standard
Steps
Install three 1.5V AA batteries.
2. Connect the FC766C1 temperature sensor to the host.
3. Press the power button to turn it on.
4. Contact or insert the Probe tip into the sample to be tested.
5. Wait for the reading to stabilize (approximately 4 seconds) before recording the temperature value.
After use, you can set the automatic shutdown time (8 minutes, 60 minutes, or disabled) as needed.
Notice
• Do not use under conditions exceeding the Permissible Ambient Temperature (-20~ 50 ° C) or Humidity (RH100%).
• Ensure that the Probe is firmly connected to avoid measurement errors.
• Regularly calibrate with CAL Check ™ to ensure accuracy.
• Pay attention to the battery level, the BEPS system can prevent measurement errors caused by battery problems.
• Probe is a penetrating design, please use it reasonably according to the material of the tested object to avoid damage to Probe.
• The instrument meets the IP65 waterproof standard, but it is still necessary to avoid liquid direct immersion in the interface when cleaning.
