Overview
The HANNA HI9350041 Thermometer is a High Accuracy temperature measurement device designed for industries with strict requirements for Measurement accuracy. Equipped with the FC767C1 Replaceable T-Type Ultra Fast Response Stainless Steel Penetrating Temperature Sensor, it features Fast Response, High Accuracy and IP65 Waterproofing. It is suitable for temperature measurement in a variety of scenarios such as Food processing, factories, barbecues, etc.
Features
Measurement range: -50.0 to 300 ° C and -58.0 to 572 ° F.
2. Fast Response: Probe Response Time is only 4 seconds.
3. High Accuracy and Reliability: Equipped with CAL Check ™ and Battery Error Prevention System (BEPS) to ensure accurate measurement.
4. Rugged and durable: The standard Probe meets the IP65 international waterproof standard and has good protection performance.
5. Flexible power management: Provide 8 minutes, 60 minutes or disable three automatic shutdown mode options.
Principle
The measuring instrument senses the temperature of the measured object through the FC767C1 T-type Thermocouple Probe. The Thermocouple converts the temperature signal into an electrical signal, and the internal circuit of the instrument processes the signal and finally displays the exact temperature value in digital form on the display screen.
Applications
Food processing, factory, barbecue, sample temperature determination
Standards
IP65 international waterproof standard
Steps
Install three 1.5V AA high-performance batteries.
2. Connect the FC767C1 temperature sensor to the host.
3. Press the power button to turn it on.
4. Insert the Probe tip into or touch the object to be tested.
5. Wait for the reading to stabilize (approximately 4 seconds) before reading the temperature value on the display.
After use, you can set the automatic shutdown time (8 minutes, 60 minutes, or disabled) as needed.
Notice
• Do not use under conditions exceeding the Permissible Ambient Temperature (-20~ 50 ° C) or Humidity (RH100%).
• Ensure that the Probe is firmly connected to avoid measurement errors.
• Regularly check the accuracy of the instrument with the CAL Check ™ function.
• Pay attention to the battery status, the BEPS system can help prevent errors caused by battery problems.
• When cleaning, make sure that the part of the instrument that meets the IP65 waterproof standard can be cleaned accordingly, but avoid soaking or using corrosive liquids.
• Probe is a penetrating type, please pay attention to safety when using it to avoid damaging the Probe or hurting the tested object.
