Overview
The HANNA HI935007 is a High Accuracy Thermometer designed for industries with high requirements for Measuring temperature accuracy. It features a fixed non-replaceable K-type penetrating stainless steel temperature sensor with a 1-meter cable length, IP65 international waterproof standard, and is equipped with CAL Check ™ and Battery Error Prevention System (BEPS) to ensure a high level of accuracy and Reliability in the measurement process, suitable for industrial, Food processing and other industries.
Features
1. Wide Temperature Measurement range: covering -50.0 to 300 ° C and -58.0 to 572 ° F.
2. High Accuracy and Reliability: Equipped with CAL Check ™ and Battery Error Prevention System (BEPS).
3. Durable: Fixed K-type stainless steel penetrating Probe, meeting IP65 waterproof standards.
4. Fast Response: Probe Response Time is about 20 seconds.
5. Flexible power management: Provide 8 minutes, 60 minutes or disable three automatic shutdown mode options.
Principle
The instrument senses the temperature of the object being measured through its fixedly connected K-type Thermocouple Probe and converts the tiny voltage signal generated by the Thermocouple into the corresponding temperature reading, which is displayed on the LCD screen. The built-in CAL Check ™ function ensures the calibrated status of the instrument, thus ensuring the accuracy of the reading.
Applications
Industry, Food processing
Standards
IP65 international waterproof standard
Steps
Install three 1.5V AA batteries.
2. Press the power button to turn on the instrument.
3. Insert or touch the stainless steel penetrating temperature sensor into the object to be measured.
4. Wait for about 20 seconds and record the temperature value on the display screen after the reading stabilizes.
5. Select the automatic shutdown mode (8 minutes, 60 minutes, or disabled) in the settings as required.
6. After use, turn off the power.
Notice
• Do not use or store the instrument beyond the Permissible Ambient Temperature (-20~ 50 ° C) or Humidity (RH100%).
• The Probe is a fixed design and cannot be replaced. Do not attempt to disassemble or replace the Probe.
• Although it meets the IP65 waterproof standard, it should still avoid long-term immersion or use in high water pressure environments.
• When the battery is low, replace the battery in time to ensure measurement accuracy.
• Give Probe sufficient Response Time when converting measurements from very high or very low temperature environments.
• When cleaning, please use a soft damp cloth to wipe the instrument shell to avoid the use of corrosion chemical Reagents.
