Overview
THZ-82 digital thermostatic gas bath Shaker is a laboratory equipment of RONGHUA INSTRUMENT brand, which is widely used in various universities, Petrochemicals, environment monitoring, soil analysis and other scientific research departments. It is suitable for the oscillation of various fluids and solid compounds such as biology, biochemistry, cells and strains. Thermostatic foster. The equipment has reasonable structure, simple operation and high stability performance.
Features
1. Reasonable structure and easy operation.
2. High stability performance.
3. Digital temperature control, Temperature range (room temperature to 100 ℃), high accuracy (+/- 0.5 ℃), small fluctuation (+/- 0.1 ℃).
4. Oscillation Frequency Range Wide (0~ 300rpm), pendulum amplitude of 20mm.
5. With timing function (5~ 120min).
6. Adopt rotary oscillation mode.
Principle
The device heats the gas bath through the electric heating system, and the temperature Control system precisely maintains the set thermostatic environment. At the same time, the drive system drives the sample tray to perform rotary oscillation, so that the sample is fully mixed or reacted under thermostatic conditions.
Applications
Universities, Petrochemicals, environment monitoring, soil analysis and other scientific research departments
Steps
1. Place the device on a stable table and connect it to a power supply (220V 50Hz).
2. Turn on the power switch and power on the device.
3. Set the required Oscillation Frequency (0~ 300rpm) through the control panel.
4. Set the desired foster temperature (RT +~ 100 ° C) through the control panel.
5. If timing is required, set the timing time (5 to 120 minutes).
6. Place the sample container to be fostered on the oscillating tray and secure it.
7. Start the oscillation and heating functions, and the device starts to work.
8. After the work is completed, turn off the heating and oscillation functions, turn off the power, and remove the sample.
Notice
• Before use, make sure that the Power supply voltage is 220V 50Hz and well grounded.
Equipment should be placed on a smooth, ventilated countertop.
• The set temperature must not exceed 100 ° C.
• When placing the sample container, ensure that it is equilibrated and fixed to prevent slipping or splashing during oscillation.
• Do not open the lid or touch moving parts during operation.
• Regularly clean the equipment and keep it drying.
• In case of failure, please cut off the power supply first and contact a professional for maintenance.
