Overview
RONGHUA INSTRUMENT instrument HY-6A double-decked digital speed control multi-purpose Shaker is an ideal tool for laboratories and laboratories in universities, environmental protection, petroleum, metallurgy, chemical industry, grain and other units, which can significantly improve the work efficiency of experimental personnel. The instrument is suitable for solution analysis of containers such as testtube, separatoryfunnel, triangular flask, etc., solves the movement phenomenon of Miscellaneous Shaker during work, has no noise, and is equipped with speed measurement and timing devices, which is convenient for laboratory operation.
Features
1.Double-decked design to improve Sample Handling capacity
2. Digital Speed Control, Precise Control of Oscillation Frequency
3. Timing device for easy experimental time management
4. Noise-free operation, improve the experimental environment
5. Stability is good, solve the phenomenon of movement at work
6. Suitable for a variety of container types, including testtube, separatoryfunnel and triangular flask
Principle
The Shaker adopts a rotary oscillation mode, which is driven by a motor to generate stable oscillatory motion. The pendulum amplitude is 20mm, and the Oscillation Frequency can be precisely adjusted in the range of 0~ 220rpm by the digital display system to achieve uniform solution mixing and analysis.
Applications
Laboratories and laboratories of major universities, environmental protection, petroleum, metallurgy, chemical industry, grain and other units
Standards
Power supply voltage 50Hz 220V +/- 10V
Steps
1. Place the container to be shaken (such as testtube, separatoryfunnel or triangular flask) on the Shaker
2. Set the required Oscillation Frequency (0~ 220rpm) through the digital display panel
3. Set the timing time (0 to 120 minutes)
4. Start the device to start oscillating
5. The device automatically stops after the timing ends
Notice
• Power supply voltage in the range of 220V +/- 10V
• Check whether the container is firmly placed before use
• Do not exceed Maximum Oscillation Frequency 220rpm
• Timing setting should not exceed 120 minutes
• Keep equipment clean and drying
• Turn off the power in time after use
