Overview
HJ-6A digital thermostatic multi-head Magnetic Stirrer is widely used in universities, environmental protection, scientific research, Petrochemicals, metallurgy and other departments. The instrument has good performance, no noise, no vibration, effective stirring effect, and is a satisfactory tool for laboratory technicians.
Features
1. Digital thermostatic control, high temperature control accuracy (+/- 1 ℃).
2. Multi-head design allows for multiple mixing tasks simultaneously.
3. No noise, no vibration, smooth operation.
4. The mixing effect is effective and the performance is good.
Principle
The device drives the stirrer swirl/spin through magnetic coupling to realize the stirring of the liquid. At the same time, the built-in heating device and temperature sensor realize accurate thermostatic heating through the digital display Control system.
Applications
Universities, Environmental Protection, Scientific Research, Petrochemicals, Metallurgy
Steps
1. Place the device on a stable table and turn on the power supply.
2. Place the container containing the liquid on the working plate and place the appropriate stirrer.
3. Turn on the power switch and set the required Rotation speed through the control panel.
4. If heating is required, set the target temperature and start the heating function.
5. After the work is completed, turn off the heating and stirring functions, and finally turn off the power supply and remove the container.
Notice
• Power supply voltage meets equipment requirements (single phase AC 50HZ 220V +/- 10V) before use.
• Do not turn on the heating function in the absence of water or drying state to prevent damage to the heating plate.
• Do not exceed Maximum capacity (1000mL * 2).
• When the equipment is working, do not touch the heating plate to avoid burns.
• Be sure to disconnect the power before cleaning and wait for the equipment to chill down completely.
• Please use the equipment in a ventilated, drying and stable environment.
