Overview
The HI98501 is a High Accuracy thermometer that uses the CAL Check ™ system to automatically verify the calibrated status at startup, ensuring measurement Reliability. Designed to meet HACCP food standards, it is equipped with a sharp penetrating AISI 316 stainless steel probe that is easy to clean and can easily insert semi-solid products (e.g. fruits, vegetables, cheese) or handle frozen materials, liquids, air, etc., making it an excellent choice for temperature measurement.
Features
1. Adopt CAL Check ™ boot self-calibrate verification system to automatically prompt the instrument status.
2. Users can freely switch between ° C and ° F temperature units.
3. Clear LCD display, easy to read.
4. Provide 8 minutes, 60 minutes or disable three automatic shutdown modes for users to choose from.
5. Comply with IP65 waterproof protection standards.
6. Probe adopts NTC Thermistor Sensor for accurate measurement.
7. Easy to clean with sharp penetrating AISI 316 stainless steel temperature probe.
Principle
The instrument senses temperature changes through the built-in NTC thermistor Sensor, and converts the signal into an electrical signal for processing and display. When started, the CAL Check ™ system runs automatically, self-checking the instrument to verify the calibrate status and ensure Measurement accuracy.
Applications
Temperature measurement in the food industry (semi-solid products such as fruits, vegetables, cheese, etc.), frozen materials, liquids, air, etc
Standards
HACCP food standard, IP65 waterproof standard
Steps
1. Press the power button to start the instrument, and the CAL Check ™ system will automatically run the self-test.
2. Confirm the status of the instrument according to the display prompt (showing "-0-" is normal, "Err" is faulty).
3. Use the Unit switch key to select the desired temperature unit (° C or ° F).
4. Insert the stainless steel probe into or contact the object to be measured for measurement.
5. Read the temperature value displayed on the LCD display.
6. Select the automatic shutdown time (8 minutes, 60 minutes, or no shutdown) in the settings as required.
7. After use, you can manually shut down or wait for automatic shutdown.
Notice
• When the instrument is started, please pay attention to the self-test prompt of the CAL Check ™ system: "-0-" means that the self-test is normal, and "Err" means that the instrument may be faulty and needs to be checked.
• Please make sure to operate within the operating Environment specified by the instrument (-30~ 50 ℃, RH95%).
• Please pay attention to safety when using sharp penetrating probes to avoid hurting yourself or damaging the object to be tested.
• When cleaning the probe, wipe it with a soft cloth to keep it clean and hygienic.
• Please use the specified 3V CR2032 button lithium battery and pay attention to the battery level.
• Although the instrument meets the IP65 water resistance standard, it is still recommended to avoid prolonged immersion or exposure to extremely humid environments.
• When the calibrating reminder appears, it is recommended to calibrate in time according to the relevant procedures to ensure the Measurement accuracy.
