Overview
The HI145-00 is a High Accuracy Thermometer with a sharp, penetrating AISI 316 stainless steel temperature sensor for easy cleaning and insertion into semi-solid products. The NTC Thermistor Sensor provides accurate temperature measurement and is the perfect instrument for measuring temperature according to the HACCP food standard. Clear LCD display is easy to read and features automatic shutdown.
Features
1. Built-in sharp penetrating AISI 316 stainless steel temperature sensor for easy cleaning.
2. Using NTC Thermistor Sensor to provide very accurate temperature measurement.
3. With CAL Check ™ verification system, automatic verification of calibrate when booting.
4. Clear LCD display, easy to read.
5. Measurement mode, automatic shutdown after 8 minutes of use.
6. Designed according to the requirements of HACCP food standards, it is a satisfactory instrument for Measuring temperature.
Principle
The instrument senses temperature changes through the built-in NTC thermistor Sensor and converts the signal into a temperature reading displayed on the LCD screen. When started, the CAL Check ™ system will automatically run for calibrate verification, displaying "-0-" if the self-test is normal, and "Err" if the instrument is faulty.
Applications
Semi-solid product temperature measurement (e.g. fruits, vegetables, cheese), liquid temperature measurement in frozen materials, air temperature measurement
Standards
HACCP food standard
Steps
1. Press the power button to start the instrument.
2. Wait for the CAL Check ™ system to complete the boot self-test (showing "-0-" means normal).
3. Insert the stainless steel temperature sensor into the object to be measured (such as semi-solid products, liquids or air).
4. Read the stable temperature reading on the LCD display.
5. After use, the instrument will automatically shut down when idle for 8 minutes in Measurement mode.
Notice
• If "Err" is displayed during the instrument self-test, it means that the instrument is faulty and needs to be checked.
• Do not operate the instrument outside the Operating Environment (-10~ 50 ℃, RH max 95%).
• Make sure to use the specified 1.5V AAA battery for power supply.
• Be careful when cleaning the Probe to avoid damaging the sharp penetrating tip.
• After the instrument automatically shuts down, if you need to use it again, you need to restart it.