Overview
The HI144-10 is a programmable thermometer that automatically records temperature data at intervals from 1 minute to 24 hours and can store up to 8000 readings. The product is equipped with the HI144 temperature recorder, USB stand, wall mount with lock and software, and can also be booked separately. Each recorder has a unique serial number.
Features
Programmable recording intervals, ranging from 1 minute to 24 hours.
2. Mass storage, capable of recording up to 8,000 temperature readings.
3. Equipped with USB bracket, wall mount with lock and special software for easy data transmission and installation.
4. The host can be booked separately and the configuration is flexible.
5. Each device has a unique serial number.
High Protection Rating of IP65.
7. Built-in temperature sensor, factory default calibrated.
Principle
The HI144-10 senses the Ambient Temperature through a built-in temperature sensor and converts analog signals into digital readings. The user can pre-set the recording interval (1 minute to 24 hours), and the device will automatically collect and store temperature data according to the set time. The stored data can be connected to a computer via a USB stand and read, analyzed and exported using the supporting software.
Applications
Cold chain transportation, storage environment monitoring, laboratory temperature monitoring, food and drug storage, industrial process control, environment research
Standards
IP65 Protection Ratings
Steps
1. Use the supporting software to connect the recorder and computer through the USB bracket for initial setting (such as recording interval).
2. Place or install the recorder in the location where it needs to be monitored (using a locking wall mount).
3. The device will automatically start recording and storing temperature data at set intervals.
4. After the monitoring is completed, connect the computer through the USB bracket again, and use the software to read and analyze the stored 8000 readings.
Notice
• Please ensure that it is used in an environment with a maximum relative humidity of 100% at 0~ 50 ° C.
• The equipment is factory default calibrated, if you need higher accuracy, please deal with it according to the actual situation.
• The power supply is CR2032 3V lithium battery, please pay attention to the power and replace it in time.
• Equipment Protection Rating IP65, but not completely waterproof and dustproof, do not use in extreme environments beyond its protective capacity.
• When booking the HI144 recorder separately, the USB holder and software are not included.
