Overview
The JINGTIAN RTD temperature sensor is a temperature measurement Accessories for Viscometers that displays the temperature of the sample or environment directly on the Viscometer display. It is compatible with the JINGTIAN brand NDJ series (optional), SNB series and DV series (standard) Viscometer.
Features
The temperature measurement range is wide, ranging from 0 to 100 degrees Celsius.
2. Measurement accuracy is high, up to +/- 0.1 ℃.
3. Used with Viscometer, temperature data can be displayed directly on the host screen.
4. Strong compatibility, it is the standard configuration of SNB series and DV series Viscometers, and can also be used as optional Accessories for NDJ series Viscometers.
Principle
The temperature sensor works based on the principle of RTD (Resistance Temperature Detector). The resistance value of its core component changes precisely with temperature changes. Probe measures this resistance change and converts it into an electrical signal, which is transmitted to the matching Viscometer host. After the host is processed, the corresponding temperature value can be displayed directly on the display screen.
Applications
Used with JINGTIAN brand Viscometer for temperature measurement of samples or environments, for viscosity test scenarios requiring precise temperature control
Standards
The information does not mention
Steps
1. Correctly insert the cable of the temperature sensor into the specified interface of the corresponding model Viscometer.
2. Immerse the temperature sensing part of the temperature sensor into the sample to be tested or place it in the environment to be tested.
3. Power on the Viscometer and wait for the temperature reading to stabilize on the display.
Notice
* Please ensure that the Probe connection is correct and stable to avoid poor contact.
* When measuring, the temperature sensing part should be fully in contact with the measured medium to obtain accurate readings.
The operating temperature must not exceed its calibrated range of 0 to 100 degrees Celsius.
* Keep Probe clean to avoid contaminating samples or affecting Measurement accuracy.
* This product is a precision measurement part, please handle it with care to avoid severe impact or bending.
