Overview
MC-3000S Coating thickness gauge is a precision measuring instrument produced by KODIN, which can quickly and non-destructive measurement of coating and platings thickness. The instrument can be used in both laboratories and engineering sites. By using different probes, it can meet the needs of various measurements and is widely used in manufacturing, metal processing, chemical industry, commodity inspection and other testing fields.
Features
1. Two thickness measurement methods of magnetic and eddy current are used to nondestructive measurement of the thickness of nonmagnetic coating on magnetic metal substrate and nonconductive coating on nonmagnetic metal substrate.
6 types of probes (F0.5, F1.2, F3, F5, F10, N1.2) can be used.
3. With temperature compensation function, equipped with Kedian's new "phase-locked loop" technology.
4. With screen flip function, you can manually select flip to display measurement data.
5. Measurement speed can choose two modes of single measurement and continuous measurement.
6. Three methods can be used to calibrate the instrument, and the basic calibrating method can be used to correct the systematic error of the probe.
7. With storage function, it can store more than 10,000 measurement points.
8. With deletion function, suspicious data or all stored data can be deleted.
9. The limit can be set, and the Measured value outside the limit can be automatically alarmed.
10. With printing function, you can connect a Bluetooth printer to print measurement data.
11. With Bluetooth 2.0 data connection function, it can communicate wirelessly with computers and printers.
12. With power undervoltage indication function.
13. There is a beep prompt during the operation.
14. There are two shutdown modes, manual and automatic.
15. The humanized V-groove structure is used to facilitate the measurement of the outer surface coating of the pipeline.
16. Adopt special large flat bottom Probe structure, measurement is more stable, Repeatability is higher.
17. Equipped with a professionally designed anti-skid pad, with the anti-skid texture on the back of the case, the operation is not easy to fatigue.
Principle
The instrument is based on the principles of magnetic Induction and eddy current. For the nonmagnetic coating on the magnetic metal substrate, the magnetic method is used for measurement; for the nonconductive coating on the nonmagnetic metal substrate, the eddy current method is used for measurement.
Applications
Manufacturing, metal processing, chemical industry, commodity inspection
Standards
GB/T 4956─1985、GB/T 4957─1985、JB/T 8393─1996、JJG 889─95、JJG 818─93
Steps
1. Select the appropriate probe according to the measurement substrate and coating type.
2. Select Single or Continuous Measurement mode as needed.
3. One of three methods can be used to calibrate the instrument.
4. Place the probe smoothly on the surface of the coating to be tested for measurement.
5. The measurement data can be stored, deleted or printed/transmitted via Bluetooth connection.
Notice
• Measured object (base material and cladding type) to select the appropriate probe.
• The instrument should be calibrated with a standard sheet before measurement.
• Note that the working Ambient Temperature of the instrument is -10 ° C to + 40 ° C, and the relative humidity is ≤ 90% RH.
• When measuring, ensure that the probe is in smooth contact with the test surface, and meet the requirements of the minimum measurement surface (φ 6mm) and the minimum radius of curvature (concave radius 5mm, convex radius 1.5mm).
• The instrument has an automatic shutdown function, please pay attention to saving the data when not in use for a long time.
• When there is a power undervoltage indication, please replace the battery in time.
The instrument stores more than 10,000 measurement points, please take care to manage the data regularly.
When connecting a Bluetooth device for printing or data transmission, make sure it is within the valid range and paired correctly.
