Overview
The LANDTEK FM-204-2K Force Gauge is a compact, versatile, High Accuracy Digital Display Thrust and Tension Test Instrument.
Features
1. High Accuracy and high resolution.
2. Numbers show, ignoring the difference.
3. N (newton), kg (kilogram), lb (pound), g (gram) four measurement units are available for selection and conversion.
4. Peak hold function. Keep peak display until manually cleared.
5. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
6. Can use alkaline battery power supply; can also be connected to 6V DC power supply.
Principle
Sensor measurement of thrust or tensile loads converts mechanical signals into electrical signals, which are processed by an internal processor and ultimately display the Measured value (both peak and instantaneous) digitally on the LCD screen.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Steps
1. Install the battery or connect the 6V DC power supply.
2. Turn on and select the desired Measurement unit (N, kg, lb, g).
3. Perform a push-pull load test, and the instrument will display the instantaneous force value.
4. If you need to record the maximum force value, you can use the peak hold function, and the peak will remain displayed until manually cleared after the test.
5. After the test is completed, you can shut down manually or wait for 10 minutes to shut down automatically without operation.
Notice
Do not exceed the allowable load of 150% F.s. The instrument will beep when it exceeds 110% F.s.
* Ambient Temperature should be between 0 and 40 ℃.
* The relative humidity of the working environment should be less than 80%.
* Should be used in the surrounding environment without source and corrosion medium.
Pay attention to promptly replace the battery or ensure that the external power supply is stable.