Overview
The LANDTEK FM-204-20K Force Gauge is a compact, versatile, High Accuracy Digital Display Thrust and Tension Test Instrument.
Features
1. High Accuracy and high resolution.
2. Numbers show, ignoring the difference.
3. N (newton), kg (kilogram), lb (pound), g (gram) four measurement units are available for selection and conversion.
4. Peak hold function. Keep peak display until manually cleared.
5. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
6. Can use alkaline battery power supply; can also be connected to 6V DC power supply.
Principle
Sensor measurement of the applied thrust or pull converts the mechanical load into an electrical signal, which is processed by an internal processor and ultimately displays the instantaneous value or holding peak in digital form in real time on the LCD screen.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Steps
1. Install the battery or connect the 6V DC power supply.
2. Turn on and select the desired Measurement unit (N, kg, lb, g).
3. Perform a push-pull load test, and the instrument will display the instantaneous force value.
4. If you need to record the maximum force value, you can use the peak hold function and manually clear it after testing.
5. After use, you can shut down manually or wait for 10 minutes to shut down automatically.
Notice
* The working environment should be free of source and corrosion medium.
* Operating temperature is 0~ 40 ℃, relative humidity < 80%.
Do not exceed the allowable load (150% F.s), the instrument will beep when it exceeds 110% F.s.
* Pay attention to the battery level, replace or use an external power supply in time to ensure Measurement accuracy.
