Overview
LANDTEK FM-207-2K Force Gauge is a digital display push-pull force test instrument with the characteristics of small, simple, multi-function and High Accuracy. It is mainly used for the measurement of thrust, pull and other loads, and is suitable for various push-pull load tests, plug-and-pull force tests and Destructiveness tests.
Features
1. High Accuracy and high resolution.
2. Numbers show, ignoring the difference.
3. N (newton), kg (kilogram), lb (pound), g (gram) four measurement units are available for selection and conversion.
4. Peak hold function. Keep peak display until manually cleared.
5. Data storage function, capable of storing 99 test values.
6. Data output function, data can be input into the computer through data cable or Bluetooth for various analysis.
7. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
8. Can use alkaline battery power supply; can also be connected to 6V DC power supply.
9. Adopt RS-232 data cable output and connect to PC.
10. Provide Bluetooth data output selection.
Principle
The Force Gauge converts the applied thrust or pull into an electrical signal through the Sensor, and digitally displays the Measured value on a four-digit large LCD screen after internal processing. It supports peak hold and instantaneous value measurement, and can transfer data to a computer for analysis via an RS-232 data cable or Bluetooth.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Notice
* Allowable load: 150% F.s (if it exceeds 110% F.s, there will be a beep alarm).
* Operating temperature: 0~ 40 ℃.
* Allowable relative humidity: < 80%.
* Working environment: no source and corrosion medium around.