Overview
The VCA-1100B standard illuminant Color Assessment Cabinet is a professional color assessment device produced by the EVERFINE brand. It integrates a variety of standard illuminants and is equipped with an intelligent statistical controller, no preheating, no flicker, and can perform color evaluation quickly and reliably. The light box has low energy consumption, no heat generation, high luminous efficiency, and a special coating leveling device to ensure uniform distribution of light rays inside the box.
Features
1. Integrated D65, CWF, TL84, U30, UV five standard illuminants, and UV ultraviolet light can be added to any white light Illuminant combination.
2. Configure the intelligent statistical controller to automatically record the opening times and accumulated usage time of each Illuminant.
3. Illuminant timing with automatic shutdown function, easy to manage.
4. Using lame plating EVERFINE's proprietary uniform light device, the rays of light are evenly distributed.
Equipped with a 45-degree standard observation stand, it meets the observation conditions of the ISO105 standard.
6. No need to warm up, start quickly, stable rays of light do not flash.
7. Low energy consumption (< 250W), no heat generation, no need for active heat dissipation, and high luminous efficiency.
Principle
The Color Assessment Cabinet integrates a variety of standard illuminants (such as D65 simulating daylight, fluorescent lamps with different color temperatures, etc.) into a box to provide a stable, uniform and international standard lighting environment for the observed sample. The intelligent controller manages the switch, combination and timing of the Illuminant to ensure that the Color Assessment is carried out under standard conditions, so as to achieve accurate comparison and evaluation of Color.
Applications
Spinning & weaving Printing and dyeing, Paint paints, Plastic products, Printing Encasement, Automotive interiors, Cosmetics, Food, Digital imaging, Building materials Pottery and porcelain, Product quality control, Laboratory Color analysis
Steps
1. Connect the light box to a 220V power supply.
2. Place the sample to be compared on a 45-degree observation platform in the box.
3. Select the desired standard illuminant (e.g. D65, TL84, etc.) or Illuminant combination (e.g. D65 + UV) through the controller panel.
4. Color of the sample is observed and compared at the selected standard illuminant.
5. After use, turn off the Illuminant through the controller or wait for its timing to automatically turn off.
Notice
* Please use 220Vac +/- 10%, 50/60Hz power supply.
* Note that the weight of the equipment is about 30Kg, and pay attention to safety when moving or installing.
* Keep the observation window and the inner wall of the box clean to avoid affecting the rays of light and observation effect.
* Do not switch the Illuminant frequently and quickly to prolong the life of the Illuminant.
It is recommended to disconnect the power supply when the device is not in use.
Data recorded by the controller can be used for Illuminant life management and maintenance reference.
