Overview
Dutch TQC viscosity calibrate oil DV2201 is a 500ml N10 viscosity calibrate oil manufactured according to ASTM D 2162, fully traceable to national standards and compatible with test equipment. It meets the international standard BS EN ISO/IEC 17025 and ISO Guide 34 dual UKAS certification for viscosity cups, Specific Gravity Cups, Viscometers for calibrating use.
Features
Manufactured according to ASTM D 2162 to ensure standardization.
2. Fully traceable to national standards to ensure accuracy.
3. Compatible with a variety of test equipment, including viscosity cup, Specific Gravity Cup and Viscometer.
Dual UKAS certification in accordance with BS EN ISO/IEC 17025 and ISO Guide 34.
5. Provide accurate viscosity calibrating values, such as rotor calibrating viscosity of 17.53mPa · s at 20 ° C and 14.26mPa · s at 25 ° C.
Principle
Viscosity calibrating oil is used to calibrate viscosity measurement equipment by providing a known and stable viscosity value. It is manufactured based on the ASTM D 2162 standard, ensuring repeatability and traceability of viscosity at different temperatures such as 20 ° C and 25 ° C, helping the equipment to accurately measure sample viscosity.
Applications
Viscosity cup calibrated, Specific Gravity Cup calibrated, Viscometer calibrated
Standards
ASTM D 2162, BS EN ISO/IEC 17025, ISO Guide 34
Notice
Make sure the equipment is clean before calibrating to avoid contamination.
• When using, the temperature should be controlled within the specified range (e.g. 20 ° C or 25 ° C) to obtain an accurate viscosity value.
Store in a cool drying place to prevent oil deterioration.
• Only for calibrating purposes to avoid misuse.
• Note that the capacity is 500ml and sealed after use.
