Overview
Kenton KH-25A digital display electric air blowing dryer is a drying equipment using microcomputer intelligent PID control technology, with temperature control, timing and over-temperature alarm functions. Suitable for routine experiments and tests, cost-effective, for drying, heat treatment and heating in various industries.
Features
1. Using microcomputer intelligent PID control technology, the system has temperature control, timing, over-temperature alarm functions;
2. The external hot air circulation system is composed of low-noise fans and air ducts, and the reasonable air duct and circulation system make the temperature in the working room stable;
3. Cold rolled steel plate with good electrostatic spray treatment, the overall design is beautiful and novel, and has a large viewing window;
4. The liner is divided into two types of mirror stainless steel and galvanized steel plate, and the semi-arc four corners are easy to clean;
5. The shelf spacing and shelf number in the working room can be adjusted to facilitate access to samples of different specifications;
6. Using high temperature silicone as the sealing edge of the door, high temperature heating tube as the heating element to ensure safety and longer service life;
7. Ergonomic fastening handle, easy to operate, and ensure sealing.
Principle
The equipment precisely adjusts the temperature through microcomputer intelligent PID control technology. The external hot air circulation system is composed of low-noise fans and air ducts to ensure uniform and stable temperature in the working room. The high-temperature heating tube is used as a heating element, combined with the high-temperature silicone sealing door edge to achieve efficient heating and heat preservation.
Applications
Drying, heat treatment, heating in various industries, biology, agriculture, scientific research and other departments
Steps
1. Place the device in a smooth and ventilated place and connect it to the power supply.
2. Turn on the power switch and set the required temperature and time parameters.
3. Put the sample into the working room and adjust the shelf spacing to adapt to the sample specifications;
4. Close the box door and start the equipment to start heating.
5. After the timing expires, the device automatically stops heating and removes the sample.
Notice
• Flammable, explosive and volatile items are strictly prohibited from being heated and dried in the box to avoid explosion;
• For the heating of high-value materials, it is recommended to install an independent temperature limiter, set the maximum temperature limit, and double insurance to ensure that the materials will not be damaged due to the failure of the electronic components of the box and the excessive heating;
• Not suitable for volatile, flammable, explosive and other items;
• It is recommended to use for routine experiments and tests, and it is recommended to install an independent temperature limiting controller for more expensive samples.
